Catalog excerpts
HPN TECHNICAL SHEET EXTENSION BAR PRODUCER: „HUBIX" reference HPN 125 HPN 250 weight [g] 160 251 length[m m] 125 250 CHARACTERISTICS Tools made of CrV. One layer of insulation, red, made of polyamide with the 30% addition fibreglass. Tools are controlled and tested (10kV/10s) in accordance with EN 60900:2004. Socket: ½” APPLICATION Live working up to 1000V a.c. and 1500V d.c. Tools designed to be inserted between a ratchet drive handle and socket to extend the reach. Used with drive handles HT or HL, torque wrench HD, socket wrenches HN or HNL and male hex. socket wrenches HNI or HNIL on overhead lines and connecting boxes. STORAGE AND MAINTENANCE Insulated or insulating hand tools should be properly stored to minimize the risk of damage to the insulation due to storage or transportation. These tools should be stored generally separated from other tools to avoid mechanical damage or confusion. Tool should be prevented from excessive heat and sun light. Use a dry tissue to clean. When tool becomes strong soiled use suitable solvent to clean. CHECK AND PERIODIC INSPECTION Before use, each hand tool should be visually inspected by the user. An annual visual examination by a suitably trained person is recommended to determine the suitability of the tool for further service. The visual check shall be considered successful if: o The tool (in particular the insulation) is free from external defect, o The marking is legible and complete.
Open the catalog to page 1Don’t use damaged, worn-out (cracks or deep scratches on insulation) or dirty tools in live working. Tool which becomes wet must be dried before use ATTENTION! In case of doubt after visual examination, the routine dielectric test should be preformed. FREQUENCY TESTS For check and periodic inspection to be carried out in according to table. CHECK PERIODIC INSPECITON Who Manager of team Supervision When Before use Once a year How Visually Visually date PERIODIC INSPECION CARD supervisor result EXAMPLE OF USE signature
Open the catalog to page 2All Hubix Sp. z o.o. catalogs and technical brochures
-
Live Working
104 Pages
-
LIVE WORKING SAFETY REINVENTED
40 Pages
-
BIRD PROTECTION SYSTEM
8 Pages
-
SAFETY TOOLS FOR E-MOBILITY
36 Pages
Archived catalogs
-
Dry cleaning set
28 Pages
-
Dry cleaning set 36kV
34 Pages
-
Equipment 1kV
102 Pages
-
Tools 1kV
128 Pages
-
General Catalogue
234 Pages
-
HT
2 Pages
-
HS-2
2 Pages
-
HN10N
2 Pages
-
HN8N
2 Pages
-
HSZ
2 Pages
-
Hack-saw
2 Pages
-
INSULATED TORQUE WRENCH ½?
2 Pages
-
RATCHET CABLE CUTTER
2 Pages
-
11923678
2 Pages
-
11923671
2 Pages
-
HS-7
2 Pages
-
HS1
2 Pages
-
11923694
2 Pages
-
11923683
2 Pages
-
11923670
2 Pages
-
11923586
2 Pages
-
11923708/
2 Pages
-
11923680
2 Pages
-
11923923
1 Pages
-
11923948
1 Pages
-
11923949
1 Pages
-
11923922
1 Pages
-
11923951
1 Pages
-
Equipment
1 Pages
-
Hand
1 Pages
-
Hand tools
1 Pages
-
SECRA catalogue
4 Pages