1. Catalogs
  2. Huber Technology
  3. ROTAMAT® Storm Screen for stormwater discharges RoK 2

ROTAMAT® Storm Screen for stormwater discharges RoK 2

ROTAMAT® Storm Screen for stormwater discharges RoK 2

ROTAMAT® Storm Screen for stormwater discharges RoK 2

Product catalog summary
Introduction
The document discusses the ROTAMAT® Storm Screen RoK 2, a solution for retaining solids in stormwater tanks and overflows. It highlights the need for efficient solids separation and continuous automatic screen cleaning, emphasizing the screen's adaptability and low-maintenance design.

The Situation
Storm events often lead to the discharge of debris into water bodies, causing pollution and high cleaning costs. The document references the DWA sheet A 128, which calls for improved water protection measures, especially in sensitive areas.

The Solution
The ROTAMAT® RoK 2 is an inverted upward flow storm screen designed for high flow rates with low hydraulic resistance. It ensures high solids retention and automatic cleaning of the perforated plate.

The Function
The RoK 1 screens are installed horizontally at overflow weirs. A screw with a brush rotates within the screen, cleaning it and moving solids towards the discharge. The system operates automatically during storm conditions.

Installation Conditions
The screen can be installed flexibly on either side of the weir overflow, adapting to local hydraulic conditions. It maintains high separation performance and minimizes headloss.

Applications
The RoK 2 is suitable for various applications in the combined sewage sector. Screenings remain within the sewer or tank and are processed at the wastewater treatment plant post-storm.

User Benefits
The screen offers optimal solids retention, no downstream impact on efficiency, and is suitable for retrofitting. It can be submerged completely and is ideal for discharges with limited upstream head possibilities.

Screen Sizes
Screen selection depends on hydraulic requirements and structural conditions. Available trough diameters range from 300 to 1000 mm, with a standard perforation of 6 mm. The capacity is up to 10 m3/sec.

Installation Examples
The document provides examples of installations to demonstrate the effectiveness of the RoK 2 screen.

Contact Information
For more information, contact HUBER SE at their provided phone number, fax, or email.
See more

Catalog excerpts

ROTAMAT® Storm Screen for stormwater discharges RoK 2-1

WASTE WATER Solutions ROTAMAT® Storm Screen for stormwater discharges RoK 2 Automatically cleaned screen for solids retention in stormwater tanks and overows – Ecient solids separation – Continuous automatic screen cleaning – Maximum adaptability – Ideal for combination with water retention elements – Sturdy, low-maintenance stainless steel design

 Open the catalog to page 1
ROTAMAT® Storm Screen for stormwater discharges RoK 2-2

During and after storm events large amounts of debris are discharged to streams, rivers and lakes through storm water overflows of combined and sanitary sewer systems. Frequently, even the installation of scum boards is insufficient to prevent such pollution. The polluting items, such as sanitary products, toilet paper, faeces, plastic foils, etc. are not only unsightly but also responsible for considerable cleaning and/or disposal costs. On the basis of the DWA sheet A 128 (an instruction issued by an association dealing with wastewater treatment) efforts to fundamentally improve the protection...

 Open the catalog to page 2
ROTAMAT® Storm Screen for stormwater discharges RoK 2-3

➤ ➤ ➤The installation conditions WASTE WATER Solutions The HUBER ROTAMAT® Storm Screen RoK 2 can be flexibly installed on the left or right side of the weir overflow to optimally meet different local hydraulic conditions. Even if the flow rate is low, the oncoming flow approaches the full screen basket length and the screenings are removed gently without blockage so that a high separation performance is achieved and the headloss minimized mechanically. HUBER ROTAMAT® Storm Screens RoK 2 can be used for a variety of applications in the combined sewage sector. To avoid another point of maintenance...

 Open the catalog to page 3
ROTAMAT® Storm Screen for stormwater discharges RoK 2-4

WASTE WATER Solutions A selection of installation examples will convince you of the HUBER ROTAMAT® Storm Screen RoK 2 HUBER ROTAMAT® Storm Screen RoK 2 before overow ROTAMAT® Storm Screen RoK 2 with an integrated gauging weir for overow measurement View of the downstream side of a ROTAMAT® Storm Screen RoK 2 View of the upstream side and lateral screenings discharge opening Screen selection and sizing depends on specific hydraulic requirements and structural conditions. Trough diameter: 300, 500, 700, 1000 mm Perforation: 6 mm standard, other perforations available on request Trough length: up...

 Open the catalog to page 4

All Huber Technology catalogs and technical brochures

  1. SRT

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.