Catalogs >
Huber Technology >
Membrane Bioreactor (MBR)

Membrane Bioreactor (MBR)
5Pages

Catalog excerpts

WASTE WATER Solutions HUBER solutions for MBR applications Tailored process engineering solutions from one source for perfect wastewater treatment

Open the catalog to page 1

The HUBER MBR system is a combination of biological wastewater treatment and high-efficient solids/liquid separation. Mechanically pre-screened wastewater is treated biologically and separated from the activated sludge by ultrafiltration plate membranes. We use membranes made of polyether sulphone with very good filtration properties and a nominal pore size of 150 kDA (38 nm = 0.038 μm). The pores are small enough to prevent passage of all solids and bacteria, cells, fats, oils, colloids, macromolecules as well as of most viruses. Reactor volume of MBR systems and their space requirement is...

Open the catalog to page 2

WASTE WATER Solutions Mechanical pre-screening with 3 mm perforated plate or 1 mm bar spacing plus grit/grease trap Buffer tank for a regular flow even with hydraulic peaks and varying loads, with simple aeration or with stirrer MBR bio-tank with fine bubble aeration individually calculated for the project Typical effluent values: Huber VRM® filtration unit, 0.038 µm pore size, retaining bacteria, viruses and germs, wastewater diffusion through pump-generated underpressure HUBER BioMem® filtration unit installed in a container as a decentralised solution Sludge dewatering for surplus sludge...

Open the catalog to page 3

For our products HUBER smartMBR, HUBER BioMem® and HUBER VRM® we rely on the type of membrane modules which are best suitable for the wastewater market and use therefore plate systems as these are less susceptible to clogging and blocking than hollow fibre membranes. ➤ Advantages of the ➤ ➤ HUBER MBR system ➤ Complete HUBER solution – all machines and process steps from one source ➤ Little need for maintenance ➤ Low operation costs ➤ Low wastewater pre-treatment requirements ➤ Flat membranes of resistant and durable PES material ➤ Ultrafiltration membranes with 38 nm (0,038 µm) pore size ➤...

Open the catalog to page 4

WASTE WATER Solutions The HUBER product portfolio includes a variety of membrane sizes and series to provide for perfect adaption of our plants to different specific inflow conditions and flow rates. ➤ HUBER smartMBR ➤ HUBER BioMem® ➤ HUBER VRM® We provide reliable solutions for all kinds of applications, whether industrial, municipal, centralised or decentralised, and for all stages in the wastewater treatment process: mechanical pre-screening, sludge treatment, membrane filtration. Subject to technical modification 0,1 / 1 – 4.2012 – 4.2012 – Vorabdruck IFAT 2012 HUBER solutions for MBR...

Open the catalog to page 5