WASTE WATER Solutions HUBER ROTAMAT® Screw Conveyor Ro 8 / Ro 8t HUBER ROTAMAT® Screw Conveyor in a closed tube (Ro 8) or in a lidded trough (Ro 8t) – Transport of coarse, fine and compacted screenings, sludge, grit, and solids from industrial proces

The HUBER ROTAMAT® Screw Conveyors are supplied as closed tube version Ro 8 or trough version Ro 8t, depending on the requirements. They are installed for horizontal, inclined and even vertical transport of screenings, dewatered sludge, grit etc. from wastewater treatment plants, or other solids from industrial processes. The entire process of material transport takes place within a closed tube or a lidded trough. Gentle movement in an enclosed pipe prevents odor nuisance and dust development. The ROTAMAT® Screw Conveyors are custom made for the individual product to be conveyed and designed...

➤ HUBER ROTAMAT® Screw ➤ ➤ Conveyor Ro 8 – closed tube WASTE WATER Solutions The ROTAMAT® Screw Conveyor Ro 8 with guide bars can be installed at an angle of up to 90° depending on the individual product to be conveyed. As an option, depending on the individual installation situation, several units can discharge into one screw conveyor as the screw shaft is supported on both ends. The motor and screw design are adaptable to specific customer requirements. Screw lengths up to 15 m for a throughput of 1 – 12 m3/h are no problem. ➤ HUBER ROTAMAT® Screw ➤ ➤ Conveyor Ro 8 – trough version The ROTAMAT®...

WASTE WATER Solutions HUBER ROTAMAT® Screw Conveyor Ro 8t after a sludge dewatering system HUBER ROTAMAT® Screw Conveyor Ro8 discharging screenings Complicated solutions with different discharge situations are no problem. Screw conveyor manufacture in the HUBER factory Two screens installed in parallel discharging into one screw conveyor HUBER ROTAMAT® Screw Conveyor Ro 8t discharging screenings into a HUBER Wash Press WAP/SL Subject to technical modification 2,0 / 2 – 6.2008 – 4.2008 HUBER ROTAMAT® Screw Conveyor Ro