WASTE WATER Solutions HUBER Curved Bar Screen Compact curved bar screen for reliable separation of solids from wastewater - No submerged driving parts - Low headloss due to the large effective bar rack surface

The CurveMax® Screen is perfectly suited to both municipal and industrial wastewater, and process water screening. Material removal from the bar rack starts at a tangent to the channel bottom so that any accumulation of disturbing material is eliminated. The optimal approaching flow conditions and large effective bar rack surface ensure a high hydraulic throughput capacity under any operating conditions. The curved bar rack Is cleaned by a rake. Depending on the bar spacing, the bar rack design Is either a bar or non- blocking wedge wire profile. At the end of the bar rack cleaning cycle the...

WASTE WATER Solutions m Functional principle of the HUBER Curved Bar Screen CurveMax® The schematic drawing shows the CurveMax® screen in its home position where the cross-sectional area of flow is not impaired (by the rake arm for example) and no driving parts are submerged in the water. The curved bar rack extends completely over the full channel width and ensures the optimal hydraulic utilisation of the available screen surface especially with existing channels. Home position without impairment of the cross-sectional The bottom end of the bar rack is tangential with the channel bottom. Material...

➤ The benets of the CurveMax® Screen ➤ ➤ at a glance ➤ No submerged driving parts ➤ Very low headloss due to the curved bar rack extending over the full channel width ➤ No accumulation of disturbing material due to material removal from the bar rack starting at a tangent to the channel bottom ➤ High screenings discharge capacity through adjustable cleaning cycles ➤ Easy-to-retrofit into existing channels, installation without channel recesses possible ➤ Easy to replace bar rack for problem-free change of bar spacing WASTE WATER Solutions ➤ No additional consumables except electric current required...