HUBER+SUHNER Excellence in Connectivity Solutions

Fixed attenuators Low power attenuators, up to 2 Watts 7 Medium/high power attenuators 12 Terminators Low power terminators, up to 2 Watts 19 Medium power terminators, up to 60 Watts 24 Miscellaneous components Feed through terminators 28 Impedance matching pads 29 Resistive power dividers 29 Hybrid and matrix couplers 32 High power Low PIM Loads for stationary use 36 Low PIM T+M components Low passive intermodulation loads 40 Low passive intermodulation adaptors 41 Passive intermodulation standards 42 Your partner for system solutions The HUBER+SUHNER Group...

Fixed attenuators

Product description Low power attenuators, up to 2 Watts BNC N PC2.4 QMA SK (PC2.92) SMA TNC Medium/high power attenuators, up to 100 Watts N SMA 7/16

Fixed attenuators Product description RF attenuators are used to reduce the power of a signal without causing distortion of its waveform. They are used in many test & measurement and communication applications • Power adjuster between different channels or inline subsystems • As a protecion for the input of the test equipment to reduce threatening RF power • To improve the imedance matching between subsystems or to the test instrumentation Features • 50 Ω or 75 Ω impedance • Fixed attenuation level from 1 dB up to 30 dB • Various bandwidth to improve the impedance matching between subsystems...

Low power attenuators, up to 2 Watts BNC, 50 Q, connector configuration male to female * 1 Watt power rating BNC, 75 Q, connector configuration male to female

Low power attenuators, up to 2 WattsN, 50 Q, connector configuration male to female Frequency DC to GHz * 1 Watt power rating N, 75 Q, connector configuration male to female Frequency DC to GHz

PC2.4, 50 Q, connector configuration male to female SK (PC2.92), 50 Q, connector configuration male to female

Low power attenuators, up to 2 Watts SMA, 50 Ω, connector configuration male to female HUBER+SUHNER type body made of copper beryllium alloy with gold plating and without epoxy captivation for better EMC shielding

Low power attenuators, up to 2 WattsSMA, 50 Q, connector configuration male to female Frequency DC to GHz TNC, 50 Q, connector configuration male to female Frequency DC to GHz

N, 50 Q, connector configuration male to female

N, 50 Q, connector configuration male to female all units are unidirectional, input port is the male connector

SMA, 50 Q, connector configuration male to female * unidirectional unit, input port is the male connector

7/16, 50 Q, connector configuration male to female * unidirectional unit, input port is the male connector

Coaxial terminators

Low power terminations, up to 2 Watts BNC 19 Medium power terminations, up to 60 Watts BNC 24

Coaxial terminators Product description Terminators (also called RF loads or dummy loads) are applied to an open end of a transmission line, e.g. an RF port, to prevent the back-reflection of an RF signal. They are used in a large variety of test & measurement, defence and communication applications. Features • Impedance matched • Standard or precision types • Various bandwidth • Low and medium power Termination quick selection chart Frequency GHz Low power, up to 2 W Medium power, up to 60 W Product details Specific data sheets and outline drawings are available on request or on our website...

11 products with chain

1 products with chain 2) waterproof

Low power terminators, up to 2 Watts QLA, 50 Q

Low power terminators, up to 2 Watts SMA, 50 Q

1 product with chain

Medium power terminators, up to 60 WattsBNC, 50 Q Power rating W * 50 Watt, if the termination is mounted on an additional heat sink with a max. thermal resistance (RJ of 5 K/Watt. Without additional heat sink this termination is applicable up to 25 Watts only.

Medium power terminators, up to 60 Watts SMA, 50 Q * 50 Watt, if the termination is mounted on an additional heat sink with a max. thermal resistance (RJ of 5 K/Watt. Without additional heat sink this termination is applicable up to 25 Watts only.

Miscellaneous components

Feed through terminators 28 Impedance matching pads 29 Resistive power dividers 29

Feed through terminations are designed to connect 50 Q transmission lines or RF devices with a high impdance test equipment, e.g. oscilloscope. Features • Allows high input impedance RF measurement 50 Q, connector configuration male to female Detailed product specifications and outline drawings are available on request.

Matching pads are designed to match 50 Q with 75 Q impedance of two different transmission lines of while preserving signal integrity. Features • Low insertion loss • High repeatability • Low return loss 50 Q with 75 Q m: refers to male, f: refers to female Detailed product specifications and outline drawings are available on request.

Signal combining

Hybrid and matrix couplers 32 High power Low PIM Loads for stationary use 36

Multiplexers/Filters HUBER+SUHNER type

Power splitters HUBER+SUHNER type

Wilkinson dividers HUBER+SUHNER type *Wilkinson Splitter with one DC path blocked

HUBER+SUHN ER developed a stepped portfolio of compact Low PIM Loads starting at 30 Watt up to 150 Watt. This provides the flexibility and freedom you need for designing a DAS network. The modularity accommodates economics without compromising quality and performance. Application In a high power wireless infrastructure, the deployment of low PIM components is crucial in regards to the mobile network's availability and service quality. 11 Two-tone test at 2 x 43 dBm / 2 x 20 W carrier

These low PIM adaptors have been specially developed for IBC/DAS/small cell grade applications where passive intermodulation requirements are crucial. 11 Two-tone test at 2 x 43 dBm / 2 x 20 W carrier * typ. -160 dBc ** typ. -171 dBc

Passive intermodulation standards 42

HUBER+SUHNER offers high performance intermodulation loads for test & measurement in multicarrier high RF power radio applications. They are primarily used to terminate open transmission lines in PIM sensitive applications such as an open port of a hybrid coupler. These intermodulation loads are made by using high performance material, especially selected to obtain the best PIM and VSWR results. Features • High stability • High repeatability • Outstanding low PIM levels (better than —160 dBc) • Other power levels and customized designs available on request Detailed product specifications and...