E-grade® Explore for Unistats®
6Pages

The E-grade Explore turns a Unistat into a Process engineering development tool

E-grade® EXPLORE for Unistats® The E-grade Explore turns your Unistat into a development tool for Process engineering E-grade Explore is a further development of the Unistat technology and utilizes the extensive features and capabilities of the Unistats to display important process data directly on the Pilot ONE. Temperatures, temperature differences, heating / cooling capacities and pump data are all displayed in real time directly on the Pilot ONE controller. Relevant measurements can also be processed via the digital interfaces. E-grade Explore enables the Unistat to be used as a process...

The tool in detail: Development and optimisation of processes made easy In many laboratories of the chemical and pharmaceutical manufacturing industry, temperature control units are used to give the required temperature to jacketed reaction vessels. Until now it was possible only to set a target value for temperature and to read the temperature of jacket and the process temperature. Additional measurement systems were required to evaluate the thermodynamic data of the process. This made process development costly and complex. The E-grade Explore is a tool which will greatly facilitate...

E-grade Explore expands process development possibilities Fig. 2 shows power currently being delivered by the Uni-stat. The negative values indicate cooling and positive indicate heating power (Watts). It also shows jacket temperature (reactor inlet temperature), return temperature (reactor outlet temperature), process temperature, the temperature differential and, optional, thermal fluid flow rate (external flow meter required). E-grade Explore simplifies the development and optimisation of processes and procedures. It is now possible to document procedures and processes in a comparatively...

Development Tool for Process Engineering The process at a glance: Additional screen for the most important process data Performance: Current heating or cooling capacity of the system Temperature values: Setpoint, internal, process, return Temperature differences: ∆T internal return, ∆T process return, ∆T process internal Circulation pump: Pressure / speed (depending on model) Advantages:  ccess to critical   A process data direct ly from the Unistat rdware required s data directly on th e device display of Pi lot ONE Setpoint temp. Internal temp. Process temp. rding and visualisation via...

Inspired by temperature designed for you Sales Technical Service Order Processing Technical details and dimensions are subject to change. No liability is accepted for errors or omisio