31130
2Pages

Hubbell Industrial Controls, Inc. License Free Radio Control Systems 120V AC Single & Two Speed Hubbell Radio Remote Control Systems Four Relay Receiver with Key Ring & Belt Clip Transmitter Spec Sheet 31.130 • October 2000 Replaces: Catalog Sheet 31132 License-Free Radio • System approved for operation under FCC Part 15 rules — no user license required. • Digital FM signal — exceptional immunity to noise. • Security — 65,000+ address codes available, user settable by dip switch • State of the art design — surface mount, microcontroller electronics. • Auto power off extends battery life. • Extremely compact and cost effective systems. Single Speed Control System Features Two Speed Control System Features • Extremely compact and cost effective Remote Control Systems • Extremely compact and cost effective Remote Control Systems • Output relays are individually settable • Output relays are individually settable for momentary or latched function for momentary or latched function • Highly reliable and secure operation • Highly reliable and secure operation • Meets FCC Part 15 rules: no user license required • 32 frequencies in the 430 MHz FM band • Active E-Stop • Meets FCC Part 15 rules: no user license required Select one of several single-speed transmitters or a two-speed transmitter: • Key-Ring - with 1 or 4 buttons • Belt-Clip - with 1, 2, 3, 4, or 6 buttons • Hand-Held - with 6 or 8 buttons • Hand-Held -- with 8 two-speed buttons. Eight Relay Receiver with “Stop” All transmitters are rated NEMA 3 for indoor/ outdoor use. Select receivers with the number of output relays to match the transmitter functions. A flexible half–wave antenna mounts directly to the receiver by BNC connector. All receivers are rated NEMA 4X for indoor/outdoor use.

Single Speed Specifcations Transmitter Specifications Transmitter Specifications Built-in antenna Frequency: 433 MHz, FM Digital pulse transmission LED to indicate “transmitting/battery low” For indoor and outdoor use: NEMA 3 and IP 54 Key-Ring Transmitter • • • • • Hand Held Two Speed Transmitter with “E–Stop” (with optional rubber boot) 1 or 4 pushbuttons 12 Volt alkaline battery Operating time: 15 hours continuous Approx. weight: 1 oz. with battery Approx. size: 3” x 1” x 1⁄2” Hand-Held Transmitter with “E-Stop” • Eight 2-speed pushbuttons, push/pull switch for “E-stop/Run”, key-switch...