Pressure sensor 527 for shipbuilding 0 ... 1 – 60 bar

Product catalog summary

Overview: The Huba Control Type 527 pressure transmitter is a compact and robust device designed for a wide range of industrial applications, including shipbuilding. It utilizes proven ceramic technology and offers both relative and absolute pressure measurement capabilities.

Specifications:

Pressure Range: Relative: 0-60 bar; Absolute: 0-1 to 16 bar.
Operating Conditions: Suitable for liquids and gases with medium temperatures ranging from -40°C to +125°C depending on sealing material.
Materials: Stainless steel and ceramic components with various sealing materials (FPM, EPDM, NBR).
Electrical Characteristics: Available in 2-wire (4-20 mA) and 3-wire (0-10 V) configurations with short circuit and polarity reversal protection.
Dynamic Response: Response time is less than 2 ms with a load cycle of less than 100 Hz.

Installation and Connections:

Pressure connections available in various thread types (e.g., UNF, NPT, G, M20x1.5).
Electrical connections include DIN EN 175301-803-A and M12x1 connectors.
Installation is unrestricted, with a recommendation for downward-facing pressure connections.

Certifications and Standards:

Certified for shipbuilding by ABS, BV, DNV GL, and LR.
CE conformity for electromagnetic compatibility.
Explosion protection with intrinsic safety certification (ATEX and IECEx).

Order Code and Variations: The document provides detailed order codes for selecting pressure mode, range, sealing material, output, electrical connection, and pressure connection. Variations in pressure range can be specified with a 'W' code.

Accessories: Includes options for connectors, mounting brackets, heat sinks, and calibration certificates.

Contact Information: Huba Control provides contact details for its headquarters and various international branches.

Catalog excerpts

Pressure sensor 527 for shipbuilding 0 ... 1 – 60 bar-1

Huba Control FOR FINE PRESSURE AND FLOW MEASUREMENT Relative and absolute pressure transmitter type 527 for shipbuilding Pressure range 0 ... 1 - 60 bar Compact, rugged construction Negligible temperature influence on accuracy The compact type 527 pressure transmitter is based upon the well proven ceramic technology developed by Huba Control over 20 years ago. These transmitters are suitable for applications across a broad spectrum of industries and shipbuilding. Certified for shipbuilding with: - American Bureau of Shipping - Bureau Veritas - Det Norske Veritas Germanischer Lloyd - Lloyd's Register Huba Control type 527 - Technical data subject to change - Edition 12/2017 Revision A 1/6

Open the catalog to page 1

Pressure sensor 527 for shipbuilding 0 ... 1 – 60 bar-2

Pressure range_ Operating conditions Medium Tolerable overload / Rupture pressure _Liquids and gases_ FPM -15 ... +125 °C (<g>-15 ... +120 °C) Medium EPDM -40 ...+125 °C (©-30 ...+120 °C) NBR -20 ... +100 °C Ambient-30 ... +85 °C (©-25... +85 °C) Storage-50 ... +100 °C < 4 bar_3.0 x fs_ Plug accommodation_ Materials in contact with medium _Stainless steel 1.4404 / AISI 316L _Polyarylamid 50% GF UL 94 V-0 Pressure connection_Stainless steel 1.4404 / AISI 316L Sealing material_FPM, EPDM, NBR_ Electrical overview 2 wi re 3 wire Polarity reversal protection Output Power supply Load Current consumption...

Open the catalog to page 2

Pressure sensor 527 for shipbuilding 0 ... 1 – 60 bar-3

Order code selection in bar Order code selection in psi 2) Delivery without female connector Huba Control type 527 - Technical data subject to change - Edition 12/2017 Revision A 3/6 Other pressure ranges on request

Open the catalog to page 3

Pressure sensor 527 for shipbuilding 0 ... 1 – 60 bar-4

Accessories (Accessories supplied loose) Order number Female connector DIN EN 175301-803-A with seal Corner-wire box for connector M12x1 with cable 2.0 m Straight-wire box for connector M12x1 with cable 2.0 m Mounting bracket with screw Heat sink with outside thread G A sealed at front - inside thread G 'A Heat sink with outside thread G A sealed at front - inside thread G A Heat sink with outside thread G A sealed at front - inside thread G A Calibration certificate Mounting bracket Heat sink I 1 Other pressure ranges on request :) Delivery without female connector 4/6 Huba Control type 527...

Open the catalog to page 4

Pressure sensor 527 for shipbuilding 0 ... 1 – 60 bar-5

Dimensions in mm / Electrical connections 2 wire Swift connector 27 30 Nm Code Nr.: 8 Device design with explosion protection: 4 ... 20 mA The grounding connection is conductively connected to the transmitter housing. Connector DIN EN 175301-803-A Not connected with transmitter housing Huba Control type 527 - Technical data subject to change - Edition 12/2017 Revision A

Open the catalog to page 5

Pressure sensor 527 for shipbuilding 0 ... 1 – 60 bar-6

Huba Control SA Succursale France Rue Lavoisier Technopole Forbach-Sud 57602 Forbach Cedex Telephone +33 (0) 387 847 300 Telecopieur +33 (0) 387 847 301 [email protected] Huba Control AG Branch Office United Kingdom Unit 13 Berkshire House County Park Business Centre Shrivenham Road Swindon Wiltshire SN1 2NR Phone +44 (0) 1993 776667 Fax +44 (0) 1993 776671 [email protected] 6/6 Huba Control type 527 - Technical data subject to change - Edition 12/2017 Revision A

Open the catalog to page 6