Catalogs >
HUBA CONTROL >
Digital Indicating Device 800

Digital Indicating Device 800
5Pages

Catalog excerpts

Digital indicating devices Digital indicator Type 800 Type 800 digital indicators are equipped with a 4 digit display, as well as optional switch and analogue outputs. The sensor signal is evaluated and indicated as pressure by the digital display. The programming of the limit value output can be executed with the buttons on the front or via a data cable from a computer. Pressure range 0 ... 800 bar Indicator in mbar / bar + Ease of use + All adjustments are possible from the front of unit + Limit value switching points pre-adjustable without application of pressure + Transmitter power supply from indicating device saves cabling + Electrically isolated signal transmission direct to measurement value acquisition system or to PLC controllers Huba Control Type 800 | Technical data subject to change | Edition 09/2020

Open the catalog to page 1

Technical overview Pressure range 1) 0 ... 800 bar Temperature Zero drift Temperature coefficient Amplification drift Ambient temperature Max. air humidity Electrical overview Max. signal current cable lenght Max. load current Output 2) 0 ... 20 mA 4 ... 20 mA 2000 m, 2 wire 500 Ohm (^ 10 V / 20 mA) 0 ... 10 VDC Power supply 20 ... 253 VAC or VDC 50/60 Hz Transmitter supply 2 wire Input 3) Power consumption typ. 30 ppM/ºC typ. 25 ppM/ºC -5 ... +45 ºC 95% non condensing Relay contacts Loading 1 A / 230 VAC at ohmic load 24 VDC, max. 25 mA 0 ... 10 VDC 0 ... 5 VDC 0 ... 20 mA 4 ... 20 mA 4...

Open the catalog to page 2

Order code selection table Accessories 2) Protection cover USB programming set (USB cable, software, operating instructions)

Open the catalog to page 3

Aperture min. spacing between indicating devices Lug marking: 1 = Auxiliary power: AC ~/DC (+) 2 = Auxiliary power: AC ~/DC (-) 3 = Auxiliary power: PE 4 = Output signal (+) 5 = Output signal (-) 6 = Output signal PE 7 = Free 8 = Two-wire sensor power supply +24V 9 = Input signal (-) 10 = Input signal voltage (+) 11 = Input signal current (+) 12 = Limit value 1, NO contact 13 = Limit value 1, Change-over contact 14 = Limit value 1, NC contact 15 = Limit value 2, NO contact 16 = Limit value 2, Change-over contact 17 = Limit value 2, NC contact 0.8- 8 Thickness of front panel Huba Control...

Open the catalog to page 4

Huba Control AG Headquarters Schweiz Industriestrasse 17 CH-5436 Würenlos Telefon Niederlassung Deutschland Vestiging Nederland Succursale France Branch Office United Kingdom Unit 13 Berkshire House, County Park Technopôle Forbach-Sud Business Centre, Shrivenham Road

Open the catalog to page 5

Digital Indicating Device 800 5Pages

Catalog excerpts

All HUBA CONTROL catalogs and technical brochures

Digital Indicating Device 800
5Pages