1. Catalogs
  2. HUBA CONTROL
  3. Differential pressure transmitter 664

Differential pressure transmitter 664

Differential pressure transmitter 664

Differential pressure transmitter 664

Product catalog summary
Overview: The Huba Control Type 664 is a pressure transmitter designed for low-pressure measurements in air and neutral gases. It utilizes silicon technology for enhanced accuracy and long-term performance. The compact design is suitable for applications where size is critical, and it offers both digital (I2C) and analog outputs.
Specifications:
  • Pressure Range: Relative and differential: -5 to 5 mbar, 0 to 5 – 2000 mbar; Absolute: 0 to 500 – 2000 mbar; Barometric sensor: 800 to 1200 mbar.
  • Operating Conditions: Medium: Air and neutral gases; Temperature: -40 to +85°C (medium/ambient), -40 to +100°C (storage).
  • Materials: Case: LCP; Substrate: Ceramic Al2O3; Sensor: Silicon; Adhesives: Silicone, Epoxy; Plastic Screwing: PC.
  • Electrical Overview: Output: 0.5 to 4.5 V, ratiometric 10 to 90%, I2C; Power Supply: 8.5 to 30 VDC; Current Consumption: < 5 mA.
  • Protection: Polarity reversal protection is mechanically provided.
Performance:
  • Accuracy: Characteristic line accuracy at 25°C: ±1.5% fs (≤ 10 mbar), ±0.2% fs (> 10 mbar), ±0.4% fs (absolute).
  • Total Accuracy: Compensated -20 to 70°C: ±2.0% fs (≤ 10 mbar), ±0.4% fs (> 10 mbar), ±0.8% fs (absolute).
  • Long-term Stability: ±0.1% fs/year.
Installation and Mounting:
  • Mounting options include snap mounting or PCB mounting. The device is suitable for manual soldering but not for reflow or wave soldering.
Compliance and Testing:
  • Electromagnetic compatibility: CE conformity according to EN 61326-2-3.
Ordering Information: The document provides detailed order codes for various configurations, including pressure mode, range, output, and connection types.
Contact Information: Huba Control provides contact details for its headquarters and branches in Switzerland, the Netherlands, France, the United Kingdom, and Germany.
See more

Catalog excerpts

Differential pressure transmitter 664-1

Differential pressure transmitter Relative, absolute and differential pressure transmitter Type 664 The pressure transmitter type 664 is designed for low pressure measurements in air and neutral gases environments. The type 664 is based on silicon technology with good accuracy and long term performance characteristics. The compact housing dimensions of the type 664 makes suitable for applications where the size plays an important role, it is also provided with I2C digital output additionally to analogue and ratiometric outputs. + The output signal is temperature compensated (from -20 up to +70 ºC), linearized and amplified + Mounting on PCB possible + Robust design Huba Control Type 664 | Technical data subject to change | Edition 09/2020

 Open the catalog to page 1
Differential pressure transmitter 664-2

Technical overview Pressure range Relative and differential Absolute Barometric sensor Operating conditions Medium 5 ... 50 mbar Tolerable overload on one side 100 ... 2000 mbar 5 ... 50 mbar Rupture pressure 100 ... 2000 mbar medium / ambient Temperature storage Materials in contact with the medium Case Substrate Sensor Adhesives Plastic screwing LCP Ceramic Al2O3 (96%) Silicon Silicone, Epoxy PC Electrical overview Output Power supply Load 0.5 ... 4.5 V 8.5 ... 30 VDC > 10 kOhm (to GND) 3 wire ratiom. 10 ... 90% 2.7 ... 5.5 VDC > 10 kOhm (to GND) 2.7 ... 5.5 VDC > 10 kOhm (to GND) 5 wire digital...

 Open the catalog to page 2
Differential pressure transmitter 664-3

Order code selection in bar 664. X X X X X X X X Accessories (Accessories supplied loose) Order number Connector RAST 2.5 with cable 30 cm Connector RAST 2.5 with cable 110 cm Connector RAST 2.5 with cable 150 cm Calibration certificate AMP connector 2) Manufacturer‘s Part. No. colour for flexible wire 3-829868-3 grey 7 x 0.20 mm = 0.22 mm2 12 x 0.20 mm = 0.35 mm2 1-966194-3 beige 7 x 0.25 mm = 0.35 mm2 Connector with cable IN = red OUT = yellow GND = black Recommended tubes Hose connector Ø 4.8 mm: Material: Ø inside: Ø outside: Temperature: max. pressure: Silicon Plastic screw connection: 4...

 Open the catalog to page 3
Differential pressure transmitter 664-4

Huba Control AG Headquarters Schweiz Industriestrasse 17 CH-5436 Würenlos Telefon Niederlassung Deutschland Vestiging Nederland Succursale France Branch Office United Kingdom Unit 13 Berkshire House, County Park Technopôle Forbach-Sud Business Centre, Shrivenham Road

 Open the catalog to page 4

All HUBA CONTROL catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.