HZ5372 2000A Primary Current Injection Fast delivery I 24-hour customer service I customizable Product Introduction HZ5372 2000A Primary Current Injection Tester is a test equipment developed by our company. It combines the advantages of similar products at home and abroad. It adopts numerical control technology and has strong anti-interference ability. Compared with the previous generation of current booster, Due to the use of low-power, large-capacity, self-coupling voltage regulators and high-permeability iron cores, the converter has the advantages of large output power, small size, and lightweight. (2) Environmental group: it belongs to the III group of instruments (that can be used in outdoor environment) in GB6587.1 -86 "General Outline of Environmental Test of Electronic Measuring Instruments". 2.3 Output current: Series: AC0~1000A Parallel: AC00~2000A stepless adjustable, panel with digital display ammeter 2.5 Output Waveform: The output current is a standard sine wave with tiny burrs, which is better than the power system requirements and standards, and the ripple coefficient is less than 0.3%. Standard sine wave. ♦Use beautiful and generous PVC panel ♦The operation time of the test equipment can be synchronized ♦Automatic recognition of normally open and normally closed contacts ♦Several calibrations can be connected in series at the same time to improve work efficiency ♦Directly display the test values of primary current and secondary current, which is convenient for test observation and recording. ♦High measurement accuracy 0.5 level ♦High power, small size, strong load capacity Small size and light weight, the volume is only 30% to 70% of similar products, and it is very convenient to carry.