SF6 Gas Vacuuming And Refilling Device Fast delivery I 24-hour customer service I customizable Product Introduction SF6 Gas Vacuum and Refill Device is mainly used in power supply companies, power engineering companies, power plants, ultra-high voltage transmission substations, SF6 electrical switch manufacturers and other departments. This equipment is used as auxiliary equipment for installation, adjustment and maintenance of SF6 electrical products such as GCBP, GCBT, and GIS. Use this device to vacuum and refill SF6 gas for the above-mentioned electrical products. At the same time, this device can also be used as equipment for vacuuming and refilling other departments. Model: SG2004 Vacuum Pump Rate: 4L/s Ultimate Vacuum: <6X102Pa Size: 520cm x300cm x 1300cm (length X width X height) Weight: About 65Kg Supply power: 220V50HzAC Noise level: <62dB(A) In addition to all the functions required for SF6 gas vacuuming and recharging, this device also has the following characteristics: 1. Electronic vacuum display (other vacuum gauges can be configured according to user requirements); 2. Equipped with various imported and domestic SF6 electrical equipment connection connectors (optional); 3. According to the time or vacuum degree set by the user, automatic vacuuming (optional); 4. Multiple protection functions to effectively ensure the safe operation of the vacuum pump; 5. It is easy to maintain, and the device adopts high-performance components, and it does not need to be repaired after long-term use.