HZ-4000BUnderground Cable Pinpoint Fault Locator Fast delivery I 24-hour customer service I customizable Product Introduction HZ-4000B Underground Cable Pinpoint Fault Locator is a multifunction underground cable and pipeline locator with transmitter and receiver. It supports inductive, direct and clamp connections, and can locate route, depth, current and insulation or coating faults, ensuring fast and accurate fault detection. A variety of methods can be used to verify each other. 2) double-level coil direct reading method; 3) single-level coil 80% method, 50% method; 1) Many Observation Parameters: can measure horizontal component, vertical component and horizontal gradient. 2) Large transmission power: the transmitter output power reaches 10W and it could be continuously adjustable. 3) Multiple Working Frequency: Active Transmit Frequencies: 512. IK. 33K. 83K Receiver frequency: 50Hz. 100Hz According to the target pipeline features (material, structure, depth, length, etc.) and the environment to select the appropriate operating frequency. display of various parameters in the detection process and signal strength. 2) Automatic: in the depth measurement, automatic change to the two-level antenna mode and automatic adjustment of the receiver sensitivity so that the measurement signal achieves the best result. The mode returns to the original one after the depth measurement. Both the transmitter and the receiver are equipped with a large capacity lithium battery pack. A fully recharge can last a whole working day outdoors. The recharging function has greatly reduced the detection costs.