Huawei AirEngine 8760-X1PRO Access Point Datasheet

Product Overview Huawei AirEngine 8760-X1-PRO is a next-generation flagship indoor access point (AP) that complies with the Wi-Fi 6 (802.11ax) standards. This high-performance AP supports flexible switching among three modes: dual-radio, triple-radio, and dual-radio + one scanning radio*, achieving a device rate of up to 10.75 Gbps. The AP uses built-in smart antennas to move Wi-Fi signals with users, significantly enhancing users' wireless network experience. The AP provides uplink optical and electrical ports, allowing customers to select different deployment modes based on scenarios. These...

Feature Descriptions Wi-Fi 6 (802.11ax) standards  As the latest generation Wi-Fi standards of IEEE 802.11, 802.11ax improves user experience in high-density access scenarios and supports 2.4 GHz and 5 GHz frequency bands.  UL/DL MU-MIMO on both the 2.4 GHz and 5 GHz frequency bands, allowing an AP to transmit data to and receive data from multiple STAs simultaneously and multiplying the utilization of radio spectrum resources.  1024QAM modulation, improving data transmission efficiency by 25% compared with 802.11ac (256QAM).  UL/DL OFDMA scheduling enables multiple users to receive and send...

High density boost technology Huawei uses the following technologies to address challenges in high-density scenarios, including access problems, data congestion, and poor roaming experience: SmartRadio for air interface optimization  Load balancing during smart roaming: The load balancing algorithm can work during smart roaming for load balancing detection among APs on the network after STA roaming to adjust the STA load on each AP, improving network stability.  Intelligent DFA technology: The dynamic frequency assignment (DFA) algorithm is used to automatically detect adjacentchannel and co-channel...

and no Wi-Fi interference sources, each AP automatically adjusts its transmit power and working channel to make the network operate at the optimal performance. In this way, network reliability and user experience are improved. Automatic application identification Huawei APs support smart application control technology and can implement visualized control on Layer 4 to Layer 7 applications. Traffic identification  Coupled with Huawei WLAN ACs, the APs can identify over 6000 common applications in various office scenarios. Based on the identification results, policy control can be implemented...

Description DL/UL MU-MIMO DL/UL OFDMA Compliance with 1024-QAM and compatibility with 256-QAM/64-QAM/16-QAM/8QAM/QPSK/BPSK Target wake time (TWT)* Low-density parity-check (LDPC) Frame aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Tx/Rx) 802.11 dynamic frequency selection (DFS) Short guard interval (GI) in 20 MHz, 40 MHz, 80 MHz, and 160 MHz modes Priority mapping and scheduling that are compliant with Wi-Fi multimedia (WMM) to implement priority-based data processing and forwarding. Automatic and manual rate adjustment (the rate is adjusted automatically by default) WLAN channel management...

Description Soft Generic Routing Encapsulation (GRE) IPv6 Source Address Validation Improvements (SAVI) Multicast Domain Name Service (mDNS) gateway protocol WMM parameter management for each radio WMM power saving Priority mapping for upstream packets and flow-based mapping for downstream packets Queue mapping and scheduling User-based bandwidth limiting Adaptive bandwidth management (automatic bandwidth adjustment based on the user quantity and radio environment) to improve user experience Airtime scheduling Air interface HQoS scheduling Security features Open system authentication WEP authentication/encryption...

Description address Device type identification according to the user agent (UA) information in an HTTP packet Device type identification according to DHCP options The RADIUS server delivers packet forwarding, security, and QoS policies according to the device type carried in the RADIUS authentication and accounting packets. Location service NOTE The AP supports the location service only in Fit AP mode. STA location Working with the location server to locate rogue devices Bluetooth location Spectrum analysis NOTE The AP supports spectrum analysis only in Fit AP mode. Identification of more than...

Description Management channel of the AP uplink port in tagged and untagged mode DHCP client, obtaining IP addresses through DHCP Tunnel data forwarding and direct data forwarding STA isolation in the same VLAN IPv4/IPv6 Access control lists (ACLs) Link Layer Discovery Protocol (LLDP) Uninterrupted service forwarding upon CAPWAP channel disconnection in Fit AP mode Unified authentication on the AC in Fit AP mode AC dual-link backup in Fit AP mode Network Address Translation (NAT) in Fat AP mode IPv6 in Fit AP mode Soft Generic Routing Encapsulation (GRE) IPv6 Source Address Validation Improvements...

Description Network Time Protocol (NTP) Technical Specifications Item Technical Interface type 2 x 10 GE electrical and 1 x 10 GE SFP+ 1 x USB NOTE  10GE electrical port can also support 100M/1000M/2.5GE/5GE. 10G optical port can also support 10GE/GE/GPON optical modules. Indicates the power-on, startup, running, alarm, and fault states of the system. Power input Power specifications Build in IoT slots: Supporting PCIE cards such as ZigBee, RFID, and Thread. PoE power supply: In compliance with 802.3at/bt. NOTE  Two 10GE electrical ports work in PoE In hot backup mode. PoE power supply mode...

Description Atmospheric pressure Antenna type Built-in smart antennas Antenna gain Radio specifications 2.4G: 4dBi 5G: 5dBi NOTE  The gains above are the single-antenna peak gains. Maximum number of SSIDs for each radio Maximum number of users ≤ 1024 (dual-radio) (512/Radio) ≤ 1152 (triple-radio) (128(2.4G Radio)+512(5G Radio1)+512(5G Radio2)) NOTE The actual number of users varies according to the environment. Maximum transmit power 2.4G: 26dBm (combined power) 5G: 31dBm (combined power) NOTE The actual transmit power depends on local laws and regulations. Power increment Maximum number of...