*mydirectindustry

Catalogs
Huanan Xinhai (Shenzhen) Technology Co.,Ltd.
HS-500B-EL-GB

HS-500B-EL-GB

Product catalog summary

Specifications:
- Pitch: 25mm
- Minimum Width: 165mm
- Open Area: 36%
- Approved by: FDA
- Rod Diameter: 4.9mm
- Flight: No
- Side Guard: Yes
- Curve: Yes

Belt Material Data:
- Material: Polypropylene
- Belt Strength (Straight): 1060 Kg/M(BW), 10600 N/M(BW)
- Belt Strength (Curve): 106 Kg/M(BW), 1060 N/M(BW)
- Temperature Range: 1℃ to 70℃
- Belt Weight: 5.8 Kg/M²

Color Options:
- Polypropylene: White, Gray, Nature, Dark Brown, Blue
- Polyethylene: White, Gray, Nature, Dark Brown, Blue
- Acetal: White, Gray, Nature, Dark Brown, Blue
- Nylon: White, Gray, Nature, Dark Brown, Blue

Friction Table:
- Polypropylene: Friction values range from 0.08 to 0.32 depending on the material
- Polyethylene: Friction values range from 0.11 to 0.41
- Acetal: Friction values range from 0.09 to 0.28
- Nylon: Friction values range from 0.13 to 0.27

Equivalent Types with Other Brands:
- Intralox: 2200
- UNI: SNB
- Rexnord: 1200
- MCC: M2500
- Habasit: 610
- KVP: 2400, 7956, M3800

Conveyor Frame Dimensions:
- Various dimensions provided for different teeth configurations

Sprocket Dimensions:
- Detailed dimensions provided for different teeth configurations

Design Guide Summary:
- Minimum turning radius (inside) is 2.2 times the belt width; 2.5 times is optimal
- Minimum straight run section near driving and idling shaft must be 2 times the belt width
- Minimum straight run section between two opposing turns must be 2 times the belt width

Guide Rail & Wear Strips:
- Various options available; consult sales team for more information

Catalog excerpts

HS-500B-EL-GB Technical Data Sheet

Open the catalog to page 1

Pitch: 25mm Minimum Width: 165mm Open Area: 36% Approved: FDA Rod: 0 4.9mm Flight: No Side Guard: Yes Curve: Yes The above content is only for reference.

Open the catalog to page 2

Conveyor Frame Dimensions Unit: mm Sprocket Dimensions

Open the catalog to page 3

Design Guide Summary • The minimum turning radius (inside) is 2.2 times of belt width under all feasible belt Width, 2.5 times of belt width is the most optimal. • The minimum straight run section near driving shaft and idling shaft of Radius belt must be 2 times of the belt width in length. • The minimum straight run section between two turns of opposing direction must be 2 times of the belt width in Length. We have different kinds of guide rail and wear strips for your choice; for more information, please consult our sales team.

Open the catalog to page 4

All Huanan Xinhai (Shenzhen) Technology Co.,Ltd. catalogs and technical brochures

Archived catalogs

HS-500A-N
4 Pages