Fact sheet ECO-Skate X48D Load moving system, steerable, 4-load points Specification: Heavy-duty load moving system for the professional indoor heavy load transport on clean, smooth and level floors, incl. alignment bars, pulling bar with pulling eye, turntable with anti-slip rubber pad and high-quality HTS 3-component polyurethane wheels, which are abrasion-resistant, cut-resistant and non-marking and suitable for all smooth and level floors with slight unevenness. In combination with a S, DUO or two ROTO trolleys with the same installation height, these trolleys form a complete system with 4 load points. Please note the steering angle of max. 45 °. If the steering angle of the skate system is fully utilized, there must be no additional steering angle of the traction unit (see operating instructions). Technical data of load moving system: 10 480 02 30 Equipped with the following wheel: 11 140 20 25 Please always observe the operating instructions, their safety instructions and local conditions! Part No. Area mm² of the roller surface pressure ▼ N / mm² Wheel material layer, core: AL Aluminium, NY Nylon PU Polyurethane, ST Steel Dimensions of wheel, inside ball bearing diameter mm Loaded area per skate in cm² Carrying Capacity of load moving skate in daN at 2km/h max. Steering bar length D for L, adjustability V for S and DUO skate systems Starting resistance* in daN, required force to start moving, under ideal conditions Traction* in daN, required force to move the load at a steady speed of 2 km/h under ideal conditions * Varies depending on the tolerances of the floor and ambient situation. All information without guarantee. en - X48D ©