Fact sheet ECO-Skate iN160S-CR Load moving system, rear, 3-/4- load points Specification: Heavy-duty load moving system for the professional indoor heavy load transport on clean, smooth and level floors. Design incl. alignment bar, anti slip rubber pad and high-quality HTS nylon wheels, which are abrasion-resistant and non-marking and suitable for all smooth industrial smooth and level floors. In combination with a L or ROTO skate with the same installation height it forms a safe overall system with 3 load points. For a DUO or two ROTO skates, observe the operating instructions for 4point supports. Technical data of load moving system: 12 160 01 20 Equipped with the following wheel: 11 085 10 14 Please always observe the operating instructions, their safety instructions and local conditions! Part No. Area mm² of the roller surface pressure ▼ N / mm² Wheel material layer, core: AL Aluminium, NY Nylon PU Polyurethane, ST Steel Dimensions of wheel, inside ball bearing diameter mm Loaded area per skate in cm² Carrying Capacity of load moving skate in daN at 2km/h max. Steering bar length D for L, adjustability V for S and DUO skate systems Starting resistance* in daN, required force to start moving, under ideal conditions Traction* in daN, required force to move the load at a steady speed of 2 km/h under ideal conditions * Varies depending on the tolerances of the floor and ambient situation. All information without guarantee. en - iN160S-CR © HT