NMR SOLENOID MAGNETS
NMR SOLENOID MAGNETS
- Mobile capability with automated cool-down and ramping, eliminating the need for cryogen refills and specialist training.
- Compact design with a small fringe field and no ceiling height constraints, making it easy to site and use.
- Vibration tolerant with no need for vibration dampers, and the option for remote location of the power supply unit (PSU) and compressor.
- Cryogen-free operation available in 200, 400, and 800 MHz with a 54 mm customer bore.
- High-resolution spectroscopy, reaction monitoring, and online/inline quality assurance and control (QA & QC).
- Suitable for use in laboratories, factories, and fume cupboards.
- Fast ramp to field and cool-down with an integrated, low-vibration cold head.
- Compatible with standard NMR accessories.
- Models available: MR 4T7-54 (200 MHz) and MR 9T4-54 (400 MHz).
- Standard system includes a magnet subsystem with a low vibration, zero maintenance pulse tube cold-head, and a 19” rack-mounted compressor and power supply.
- Active magnet protection electronics with integrated temperature sensors and voltage taps.
- On-magnet energy-dump system and a 1-year warranty.
- Site requirements include a cooling supply of less than 6 liters of water per minute and electrical power of 50/60Hz, 3P, 4-8kW.
- User serviceable adsorber change on compressor every 20,000 hours.
- Includes a 2D 1H-13C HMBC experiment requiring excellent temporal stability over an acquisition time of approximately 1 hour.
- Chloroform lineshape sample for the 400 MHz magnet.
Catalog excerpts
Cryogen free 200, 400, 800 MHz 54 mm customer bore Compact design Low fringe field Vibration tolerant Easy to site Mobile capability Automated cool-down and ramping No cryogen refills No specialist training required High resolution spectroscopy Reaction monitoring Online and inline QA & QC Laboratory, factory, fume cupboard, it’s your choice Easy to site Small fringe field No ceiling height constraints No liquid-helium filling constraints Vibration tolerant, no vibration dampers Remote location of PSU and compressor if required Magnets available at 200, 400 and 800 MHz Standard customer bore size Compatible with standard NMR accessories Fast ramp to field Fast cool-down Integrated, low-vibration cold head +64 4 570 8880 HTS-110 1B Quadrant Drive, Waiwhetu Lower Hutt 5010, New Zealand
Open the catalog to page 1
NMR SOLENOID MAGNETS Standard system includes Magnet subsystem with integrated low vibration, zero maintenance pulse tube cold-head 19” rack mounted compressor and power supply Active magnet protection electronics linked to integrated temperature sensors and voltage taps On-magnet energy-dump system 1 year warranty Chloroform lineshape sample for the 400 MHz magnet Site Requirements <6 litres water per minute cooling supply 50/60Hz, 3P, 4-8kW electrical power User serviceable adsorber change on compressor every 20,000 hours Vacuum pump for initial installation and servicing only 5 Gauss line...
Open the catalog to page 2All HTS-110 catalogs and technical brochures
LN2 Cooled Short Solenoid2 Pages
LM Optical Short Solenoid2 Pages
2T Projected Field Magnet2 Pages
