1. Catalogs
  2. H.T.P.
  3. Atex Connectors

Atex Connectors

Atex Connectors

Atex Connectors

Product catalog summary
Overview: This document provides detailed specifications for M12 A-Coded connectors, which are circular connectors adhering to IEC 61076-2-101 standards. These connectors are designed to be field attachable and are available in both straight (180°) and angled (90°) configurations.
Technical Specifications:
  • Connector Type: M12 A-Coded
  • Standard Compliance: IEC 61076-2-101
  • Design: Circular, field attachable
  • Material: Brass housing with gold flash or nickel plating
  • Contact Options: Solder or screw contacts
  • Contact Variants: 4, 5, 8, and 12 poles
  • Contact Screw Torque: 0.2 N*m
  • Termination Type: Solder or screw
  • O-ring Material: NBR
  • Cable Compatibility: Diameter from ø 4-8mm to ø 6.5-9.5mm
  • Cable Gland Standards: PG7 or PG9
  • Temperature Range: -20°C to +85°C
  • Protection Rating: IP 65/67 when assembled
  • Flammability: UL94-V0
  • Voltage Capacity: 30V to 250V AC/DC depending on model
  • Current Capacity: 1A to 4A depending on model
Construction Details:
  • Coupling Nut Material: Brass with nickel plating
  • Coupling Nut Torque: 0.6 N*m
  • Core Material: PA66 UL94-V0
  • Nut Type: Hexagonal nut SW17
Part Numbers: The document lists various part numbers for different configurations and specifications, including 12MB5000-ATEX and 12MC8000-ATEX.
See more

Catalog excerpts

Atex Connectors-2

The electrical, electronic and mechanical equipment present in not dangerous places are safe if they are CE-labelled, that means that the manufacturers ensure the observance of the requirements established by EU applicable regulations and standards. Increasingly, electrical and electronic equipment is being used in potentially hazardous environments to automate or control certain production processes. However, the use of such equipment in close proximity to flammable or combustible gases or materials increases the risk of fire or explosion,as the normal operation of electrical and electronic...

 Open the catalog to page 2
Atex Connectors-3

GUIDE TO THE ATEX WORLD: 1 Group Equipment II = used in all other EX ATEX environments. Marking. Equipment Category 2G = equipment suitable for areas where, during normal activities, explosive atmospheres due to gas, vapors or mists (zone 1) may occur; suitable to be installed in zone 1. 2D = equipment suitable for areas where, during normal activities, explosive atmospheres due to a mixture of air and flammable dusts (zone 21) and that has inside a bonded device that will be connected to a category 1 equipment; suitable to be installed in zone 21. The ATEX Directive lays down the categories...

 Open the catalog to page 3
Atex Connectors-4

Product description Connector type Conforms to Product description Construction type Connector type Part number B DIN valve connectors M1NS2000-ATEX Industrial 11mm B 2poles + P.E. Conforms to Contacts spacing Construction type Number of contacts Part number Earth positioning Contacts spacing Housing colour Number height Housing of contacts Earth positioning Cable gland Housing colour Gasket type Housing height Technical data Cableof termination Type gland Gasket screw Contacttype torque 2poles + P.E. 30mm H.12 (turnable) PG9/PG11 unified Black Flat Silicone gasket 30mm 3poles + P.E. 30mm H.12...

 Open the catalog to page 4
Atex Connectors-5

Product description Connector type Circular connector field attachable Circular connector field attachable Circular connector field attachable Circular connector field attachable Construction type Part number Housing type Cable gland Contacts type Technical data Type of termination Screw contacts Screw contacts Screw contacts Solder contacts Contact screw torque Contacts material Brass+Gold flash Brass+Gold flash Brass+Gold flash Brass+Gold flash Housing material Internalcore material Flammability resistance Brass+Nickel plated Brass+Nickel plated Brass+Nickel plated Brass+Nickel plated O-ring...

 Open the catalog to page 5
Atex Connectors-6

Product description Connector type Circular connector field attachable Circular connector field attachable Circular connector field attachable Circular connector field attachable Construction type Part number Housing type Cable gland PG9-11 unified /Double cable exit PG9-11 unified /Double cable exit PG9-11 unified /Double cable exit Contacts type Technical data Type of termination Screw contacts Screw contacts Screw contacts Contact screw torque Brass+Gold flash Brass+Gold flash Brass+Gold flash PG9-11 unified /Double cable exit Contacts material Brass+Gold flash Housing material Internalcore...

 Open the catalog to page 6
Atex Connectors-7

Product description Product description Connector type Connector type Circular connector field Circular connector fieldconnector field Circular connector fieldconnector field Circular connector fieldconnector field Circular connector field attachable attachable Circular attachable attachable Circular attachable attachable Circular attachable attachable Conforms to Construction type Construction type A-Coded M12 Part number Housing type Cable gland Cable gland PG9 standard Contacts type Contacts typeFemale Technical data Type of termination Technical data Type of termination contacts Screw PG9...

 Open the catalog to page 7
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.