Model number:GLASS RB-TVP The Camera for Glass Furnace is made of 310S stainless steel and features an air-water- cooled protective tube with a corrosion-resistant, high-temperature-resistant coating on the outer layer. It can be directly inserted into the furnace (up to 2000 °C) for continuous real-time monitoring. Equipped with a 3-million-pixel high-temperature camera and a sapphire high-temperature lens, the system can clearly monitor materials,flames, bubbles, and other critical conditions inside the furnace. Product features ■ Using a megapixel high-definition image sensor, the furnace image is clearer; ■U nique wind and water cooling protection, so that the probe can be used in 2000C environment; ■ Image signal digital TCP / IP network output, image without interference; ■ The probe adopts the pneumatic exit device; ■ The probe can automatically exit the furnace protection under the condition of over-temperature, gas break and power failure; ■ The probe is made of special high temperature resistant stainless steel material, with high temperature resistance and corrosion resistance; ■ Fixed installation on the kiln for full monitoring. • Online observation of the flame burning in the furnace; • Online observation of the entire melting process of the glass liquid in the furnace; • High reliability structural design, the equipment is basically maintenance-free; • High-performance HD image sensor allows clear images in the furnace; • For different kilns, we can provide probes of different sizes to meet on-site use requirements.