video corpo

NRG

NRG

NRG

Product catalog summary
Overview
The document provides detailed information on the validation and inspection of electric vehicle charging stations (EVSE) using HT's new instruments, MACROEVTEST and COMBI521EV. These instruments comply with IEC/EN 61851-1 and IEC/EN 60364-7-722 standards and are designed for safety tests in both private and industrial environments. The HTAnalysis App facilitates data transfer to mobile devices for customization and sharing.

Specifications
  • MACROEVTEST and COMBI521EV are multifunction instruments for electrical installation safety testing, power quality analysis, and EVSE safety testing.
  • Compatibility with EV-TEST100 for electric column verification.
  • Integrated WiFi and compatibility with HTAnalysis App.
  • Internal memory for data saving with TOPVIEW software.
  • Insulation testing with voltages ranging from 50V to 1000V DC.

Testing Procedures
  • Automatic sequence of tests for EVSE verification includes output voltage check, continuity of protective conductors, insulation resistance measurement, and status verification (standby, vehicle detected, ready, fault simulations).
  • Global earth resistance measurement and RCD tripping time measurement (types A, B, DD 6ma).

Accessories
  • Various accessories are provided, including cables, clamps, probes, and software for enhanced testing capabilities.
  • Optional accessories include remote start/stop switch probe, loop zero adapter, and earth leakage relay tester.

Technical Specifications
  • Tripping time and current measurement for RCDs with auto/ramp/manual mode.
  • Non-trip earth resistance and ground resistivity measurement by 4-wire method.
  • Loop/Line impedance measurement with high resolution.
  • Real-time measurement of voltage, current, power, and environmental parameters.
  • Voltage and current harmonics measurement up to the 25th and THD%.

Contact Information
HT ITALIA S.R.L., Via della Boaria, 40 48018 Faenza (RA) Italy. Phone: +39 0546 621002, Email: [email protected], Website: ht-instruments.com
See more

Catalog excerpts

NRG-1

Validation and inspection of electric car charging stations

 Open the catalog to page 1
NRG-3

Validation and inspection of electric car charging stations Recharging stations: a new way to use electric energy. MACROEVTEST and COMBI521EV, HT’S new instruments for validation and inspection of electric car charging stations (EVSE) in compliance with standards IEC/EN 61851-1 and IEC/EN603647-722, and for safety tests in private and industrial environments. Thanks to the brand new HTAnalysis App, free to download for iOS and Android systems, MACROEVTEST and COMBI521EV are capable of transferring measured and recorded data onto tablets and smartphones, thus giving the operator the possibility...

 Open the catalog to page 3
NRG-4

EV-TEST EVSE ADAPTER FOR ELECTRIC VEHICLE CHARGER TESTING > Suitable for charging stations with charging mode 2 and 3 > Vehicle simulation with Control Pilot (CP State) > Cable capacity simulation with Proximity Pilot (PP State) > Ground fault simulation (Fault PE) > Error simulation on the Control pilot signal (Fault E) > Phase presence indication via three LEDs > Connection terminals for connecting external load, in order to verify the correct operation of the energy meter of the charging station > Measurement terminals L1-L2-L3-N-PE to connect HT verification tools, perform safety and functional...

 Open the catalog to page 4
NRG-5

COMBI521EV MULTIFUNCTION INSTRUMENT FOR ELECTRICAL INSTALLATION SAFETY TESTING, POWER QUALITY ANALYSIS AND EVSE SAFETY TESTING DK AUTOMATIC SEQUENCE OF TESTS FOR THE VERIFICATION OF EVSE STATIONS > Check of the output voltage value > Continuity check of the protective conductor > Insulation resistance measurement > Check of the status: • Standby (status A) • Vehicle detected (status B) • Mechanical interlock verification (status B) • Ready (charging) (status C) with ventilation (status D) • Fault simulation on the protective conductor (fault PE) • Fault on CP signal (fault E) > Global earth resistance...

 Open the catalog to page 5
NRG-6

MACRO EVTEST MULTIFUNCTION INSTRUMENT FOR ELECTRICAL INSTALLATION SAFETY TESTING, POWER QUALITY ANALYSIS AND EVSE SAFETY TESTING AUTOMATIC SEQUENCE OF TESTS FOR THE VERIFICATION OF EVSE STATIONS > Check of the output voltage value > Continuity test of the recharging station's protection conductor > Insulation test of the recharging station > Verification of the statuses of the recharging station • Vehicle not present (status A) • Vehicle present but not being charged (status B) • Mechanical interlock verification (status B) • Mechanical interlock verification (status B) • Fault simulation on...

 Open the catalog to page 6
NRG-7

>C2033X Three wire cable with Schuko plug > UNIVERSALKITG3 Set of 4 cables + 4 alligator clips + 3 test leads (MACROEVTEST) > UNIVERSALKITCOMBI Set of 3 cables + 3 alligator clips + 3 test leads (COMBI521EV) > KITTERRNE Set of 4 cables + 4 earth probes + carrying bag (MACROEVTEST) > PT400 Touchscreen stylus (included inside meter) (MACROEVTEST) > PR400 Remote START/STOP switch probe (optional for COMBI521EV) > ZEROLOOP Loop zero adapter (MACROEVTEST) > EV-TEST100 EVSE test adapter > RCDX10 Accessory to test earth leakage relay (MACROEVTEST) > SP-5100 Carrying straps > TOPVIEW2006 PC Windows software...

 Open the catalog to page 7
NRG-8

HT ITALIA S.R.L. Via della Boaria, 40 48018 Faenza (RA) Italy T +39 0546 621002 | F +39 0546 621144 M [email protected] | ht-instruments.com

 Open the catalog to page 8
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.