Finned Strip Heaters

Product catalog summary

Description: Finned strip heaters are designed for efficient air heating applications. They feature rapid heat transfer due to a large finned area, similar to strip heaters but with locked-on fins. This design lowers sheath temperature and extends element life. The fins are mechanically attached to maximize surface contact, enhancing heat transfer to air. The spacing between fins is approximately 5 millimeters.

Applications: These heaters are suitable for various applications including shrink tunnels, duct heaters, space heaters, heat curing, ink drying, food warmers, drying ovens, incubators, load bank resistors, process welding, dehumidifiers, and electrical motors.

Specifications: The core dimensions are 10 x 40 mm, with sheath and fin materials available in stainless steel, aluminum, or galvanized iron. Termination types include offset terminations, parallel terminals, and terminals at each end, with options for flexible cables. Mounting holes can be provided for secure fixing. The heaters are available in a range of sizes, wattages, and voltages, with a maximum watt density of 8.0 W/cm² and operating temperatures up to 450°C. They support all monophase voltages.

Finned Strip Heater Characteristics: Termination options include vertical and horizontal alignments, offset terminals, and flexible high-temperature insulated leads. The heaters are available in a standard version and a version with mounting holes, and they can be provided in IP65 versions.

Contact Information: HT Spa and HT Heizelemente Deutschland GmbH provide contact details for domestic and export sales, including phone numbers, fax numbers, and email addresses for inquiries.

Catalog excerpts

Finned strip heaters An excellent choice for air heating applications Rapid Heat Transfer to air from large finned area. Similar in construction to the Strip Heaters these heaters include locked-on fins. Lower sheath temperature and element life are all maximized by this finned construction. The fins are specially designed and mechanically attached to provide efficient heating in many air or gas process heating applications. Fins are attached in a way that maximizes surface contact so heat is transferred into the air faster. ApproximatelyS.p.A. 5 millimeters between each fin. applications Shrink tunnels Duct heaters Space heaters Heat curing Ink drying Food warmers Drying ovens Incubators Load bank resistors Process welding Dehumidifiers Electrical motors specifications Core dimensions: 10 x 40 mm Sheath Material: stainless steel Fin Material: Stainless steel, aluminium or galvanized iron Maximum Watt Density: 8.0 W/cm2 Maximum Operating Temperatures: 450°C Possible electric connections: all monophase voltages Terminations Type: Off set terminations, Parallel terminals, terminal at each end. Strip heaters are also available with flexible cables. Strip heaters can also be provided with mounting holes for an optimum security fixing. Finned strip heaters are available in a full range of sizes, wattages and voltages. Please do not hesitate to contact us for application or product assistance. Finned Strip Heater characteristics Terminations Type

Open the catalog to page 1

Finned strip heaters Termination Options Version with Mounting Holes Horizontal Alignment Terminals at one end Vertical Alignment Terminals at one end Standard Version Flexible high temperature insulated leads at one end HT Spa - Via Conegliano, 73/B - 31058 Susegana (TV) - Italy - fax +39 0438 62788 - www.htspa.it domestic sales - tel. +39 0438 454294 - [email protected] - export sales - tel. +39 0438 454290 - [email protected] HT Heizelemente Deutschland GmbH - Brinkeweg 18 - 33758 Schloss Holte-Stukenbrock Tel: +49 5207 99 12 29 0 - Fax: +49 5207 99 12 29 19 - [email protected] - www.ht-heizelemente.de...

Open the catalog to page 2

Finned Strip Heaters

Finned Strip Heaters

Catalog excerpts

All HT SpA catalogs and technical brochures