Technical data for HSM 208F steep slope Cabin: • IVECO • NEF 6 cyl. Common Rail Turbo / EuroMot TIER3 • Engine output: 175 kW (238 DIN horsepower) • Max. rpm: 2200 rpm • Max. torque: 1020 Nm at 1500 rpm • Engine capacity: 6.7 litres Electrical system / Instruments: • 1-motor hydrostatic transmission • NAF 2-speed transfer gearbox • traction: 200 kN Technical subject to change. April 2015 • HSM Ecommand colour-display • 5 operator programs + factory setting • diagnosis-tool and error-indication • graphic support at parameter editing • generator 24 V, 90 A • 4 service-free dry batteries á 56 Ah • Option: Remote service • NAF balanced portal tandem axles • 100% selectable front and rear differential locks • 2-circuit brake, disk brake running in an oil bath • Spring-loaded parking brake Torsion lock: • Articulated steering with 2 cylinders • 43° steering angle Loading area: Tyres: Size: Total width: • Standard: 710/45-26.5 2860 mm • Choice of: 600/45-26.5 2660 mm Width with chain belts: 2960 mm 2760 mm Diesel tank: • Tank capacity: • raisable to side on parallel linkages • ROPS, FOPS, OPS tested • rotary seat with pedals in front and rear • wiper in front and rear, optional on the side • air cushioned seat with seat heating • hot-water heating • air conditioning Hydraulics: • Load sensing • Variable pump (working pump): Flow rate: 304 l/min at 1600 rpm Pressure: up to 350 bar • Fixed displacement pump: Flow rate: 17.6 l/min at 1600 rpm Pressure: 120 bar • Tank: 140 l • Hydraulic fluid: Saturated, synthetic ester Panolin HLP SYNTH with Kleenoil Microfiltration water hazard class 1 • Control block: Rexroth M4-15 • crane control: HSM ECOmmand with graphic-colour display, menu navigation via scroll wheel, diagnosis-tool and error-indication, 5 operator programs • 4 bunks • Length: Variable - depending on construction • Cross-section: 4.3 m2 • Payload: Choice of 12 t or 14 t Standard equipment steep slope version: • + 30° /- 6° crane tilt • Traction winch - Synchronisation of transmission and winch - Radio-controlled winch - 450 m cable take-up with 16 mm cable diameter (dilivery without rope) - 10 kNm tractive force - Safety grille on the cab rear for driver safety - Telescoping rear for optimum charging • Additional accessories on request e.g. Bogielift front/rear separately controllable HSM Hohenloher Spezial- Maschinenbau GmbH & Co. KG D-74635 Neu-Kupfer Im Greut 10 Phone + 49 7944 / 9191-0 Fax + 49 7944 / 9191-77 E-mail: [email protected] www.hsm-forest.com Technik die Freude macht. THE NEW GENERATION OF WINCH-SUPPORTED DRIVE TRANSMISSIONS

The new generation Since fully mechanised short timber technology was not available for steep slopes until a short time ago, there is now a high demand for suitable, high-performance machines that cause as little soil damage as possible to the steep slopes endangered by erosion. In recent years, HSM has advanced steep slope technology for gear units with multiple innovative solutions and continued to invest in this technology in order to meet customers' increasing needs and contribute to their success. HSM took a giant step forward with the force-synchronised HSM Force-Synchro Drive, introduced...