*mydirectindustry

Catalogs
HSM - Hohenloher Spezial-Maschinenbau GmbH & Co. K
HSM Force Synchro Drive

HSM Force Synchro Drive

Product catalog summary

Introduction
The document discusses the HSM Force Synchro Drive technology and its application in forestry equipment, specifically designed for timber harvesting on slopes. HSM is recognized for pioneering wheeled forest machines suitable for slope terrains, focusing on minimizing soil disturbance while maximizing productivity.

Innovations and Technologies
In 2010, HSM introduced the Force-Synchro drive and the HSW-15 winch, enhancing safety and efficiency in slope operations. The Force-Synchro drive allows for adaptive force distribution between cable and wheels, reducing soil impact and cable stress while improving traction.

HSW-15 Winch Features

Designed specifically for slope applications.
Provides up to 150kN constant pulling force.
Equipped with a heavy-duty planetary gearbox and hydraulically actuated wet disc brake.
Features wireless remote control and reduced cable wear.

HSM 405H2L 8WD Hillclimber Highlights

Stable harvester for slopes with an 8-wheel drive and low center of gravity.
Includes a rear-mounted, tiltable HSW-15 winch.
Features balanced bogies, optional bogie lift, and a high steering angle.
Engineered for steep slopes with a slope version of engine oil sump and fluid reservoirs.

HSM 208F Hillclimber Highlights

Incorporates the HSW-15 winch in the crane base.
Equipped with a camera for the rope drum and radio-controlled winch.
Features balanced bogies and optional bogie lift.
Designed with a robust rear window guard for driver protection.

Operational Limits and Safety
The document emphasizes that machines should not operate on slopes where they cannot safely stop without winch assistance. Machines have been tested on slopes up to 100% with sufficient traction, and the winch is intended to complement, not replace, wheel chains or bogie-tracks.

Contact Information
HSM Hohenloher Spezial-Maschinenbau GmbH & Co. KG, located in Neu-Kupfer, Germany, provides contact details for further inquiries.

Catalog excerpts

HSM Force Synchro Drive Harvester HSM 405H2L 8WD HSM Slope terrain Winch 15 tons Forwarder HSM 208F Hillclimber 2012

Open the catalog to page 1

A new generation of winch assisted p Considering the specific needs of timber harvesting on slopes, there is a growing demand for fully adapted, highly productive equipment causing minimum soil disturbance. In the last years, HSM has introduced considered a pioneer of wheeled forest machines on slopes. HSM continues to technologies to meet customers" requirements and support their success. In 2010, HSM has made a big step forward with the new Force-Synchro drive and the The winch capacity, the higher cable force, hydrostatic powertrain enable a safer and more efficient driving. distributes the...

Open the catalog to page 2

• specific winch design for slope application • up to 150kN constant pulling force independent of the cable layer on the • heavy duty planetary gearbox with hydraulically actuated wet disc brake • wireless remote control of the winch • cable wear highly reduced. The cable only follows the drum radius as opposed to spill winches or other spooling devices Will soil damage increase on steep ..Practical experince says: No! Slopes can be 40%, 50%, 60%, 70%, or more, because with HSM Force-Synchro drive, it is as if one is working stable harvester on slopes on the market • winch HSW-15 mounted in the...

Open the catalog to page 3

NEF 6 Cyl. Common Rail Turbo TIER3 Power Train: Tillable cabine forward 12° / reverse 12° Curved windscreen Lexan Protection tested confirming with ROPS ISO 8082 Wiper in front and on the side Comfortable, air cushioned seat Warm water heater Lifting moment gross 188 kNm Front & Rear switchable differential lock 100% Control System: Overall width: Hydraulic System: Load Sensing Pump flow: 469 l/min at 1400 rpm Gear pump 15,4 l/min at 1400 rpm Hydraulicoil: Panolin HLP SYNTH with Kleenoil Crane-control: Digital elektronics CMC with individual ajustable speed and ramptimes, 5 driver programs Equipment...

Open the catalog to page 4

NEF 6 Zyl. Common Rail Turbo/ EuroMot TIER3 Power Train: Hydrostatic-mechanically drive Front: Switchable differential lock 100% Rear: Switchable differential lock 100% Brake with 2-circles, oil-cooled multiple-disc powerbrake Spring-loaded power parking-brake Articulated frame steering Width with Size: Overall width: Bogie-tracks: Hydraulic system: Load Sensing Variable pump: Pump flow: Gear pump: Pump flow: unsaturated, synthetic ester Panolin HLP SYNTH mit Kleenoil Digital elektronics CMC with individual ajustable speed and ramptimes, 5 driver Elektrical system: 4 service-free dry batteries...

Open the catalog to page 5

Partner of the forestry since 1967 HSM Hohenloher SpezialMaschinenbau GmbH & Co. KG D-74635 Neu-Kupfer · Im Greut 10 Tel. +49 (0) 79 44 / 91 91-0 · Fax 91 91-77 Mail: [email protected] www.hsm-forstmaschinen.de

Open the catalog to page 6

HSM Force Synchro Drive

HSM Force Synchro Drive

Catalog excerpts

All HSM - Hohenloher Spezial-Maschinenbau GmbH & Co. K catalogs and technical brochures