HSM 904 X = available with surcharge HSM 904 O = standard equipment # = not available Lifting moment Gripper type Crane type Last stanchion variable in "centre" position • Standard: Adler HY 20 (2 x 100 kN) double-drum winch Max. cable take-up of 14 mm, 100 m • Optional: Adler HY 24-SG (2 x 120 kN) double-drum winch Max. cable take-up of 14 mm, 130 m Adler HY 32-SG (2 x 160 kN) double-drum winch Max. cable take-up of 16 mm, 100 m • Standard: Adler HY 20 (2 x 100 kN) double-drum winch Max. cable take-up of 14 mm, 100 m • Optional: Adler HY 24-SG (2 x 120 kN) double-drum winch Max. cable take-up of 14 mm, 130 m Adler HY 32-SG (2 x 160 kN) double-drum winch Max. cable take-up of 16 mm, 100 m Last stanchion variable in "short" position Last stanchion variable in "long" position Quick-change twin stanchion for 2 x 2 or 2 x 2.5 m wood (not for 805F short version) Forwarder: • Epsilon crane M70 F80 (Series) • Additional cranes on request • Epsilon crane M70 F80 (Series) • Additional cranes on request Low crane pillar (height: 1730 mm) * B: minimum machine width (dimensions in mm) Standard equipment: • Headboard grid and first stanchion removable • Last stanchion can be removed and adjusted to 2.4 m, 3.2 m and 3.8 m • Height-adjustable roller block • Torsion lock with hydraulic cylinder • reversing camera with color monitor • rear headlights Special equipment: • Front polder shield • Straight shield • Clamping workbench with quick-change plate • Twin stanchions as 2nd and 3rd stanchion on quick-change plate • Rotating stanchion • Additional accessories on request Rope forwarding possible Without reconfiguring the stanchion Log forwarding with quick-change clamping workbench * B: minimum machine width (dimensions in mm) Standard equipment: • Headboard grid and first stanchion removable • Last stanchion can be removed and adjusted to 2.8 m, 3.6 m and 4.2 m • Height-adjustable roller block • Torsion lock with hydraulic cylinder • reversing camera with color monitor • rear headlights Special equipment: • Front polder shield • Straight shield • Clamping workbench with quick-change plate • Twin stanchions as 2nd and 3rd stanchion on quick-change plate • Rotating stanchion • Additional accessories on request Rope forwarding possible without reconfiguring the clamping workbench HSM Hohenloher Spezial- Maschinenbau GmbH & Co. KG D-74635 Neu-Kupfer Im Greut 10 Phone + 49 7944 / 9191-0 Fax + 49 7944 / 9191-77 E-mail: [email protected] www.hsm-forest.com Technik die Freude macht. Technical subject to change. April 2015 model series

Technical data Engine: • IVECO • NEF 6 cyl. Common Rail Turbo / EuroMot TIER3 • Engine output: 175 kW (238 DIN horsepower) • max. rpm: 2200 rpm • max. torque: 1020 Nm at 1500 rpm • Engine capacity: 6.7 litres Transmission: • 904H: HSM High Speed Drive (71 series) • 904ZF: ZF 6WG-190 load switching converter transmission 6 forward gears, 3 reverse gears speed at 1st gear 0-14 km/h Electrical system / Instruments: • HSM Ecommand colour-display • 5 operator programs + factory setting • diagnosis-tool and error-indication, graphic support at parameter editing, generator 24 V, 90 A; 2 service-free...