Technical data Mercedes Benz OM 904 LA, 4 cyl. Turbo Diesel / TIER3 Engine output: 129 kW (175 DIN horsepower) at rpm: 2200 rpm Max. torque: 675 Nm at 1200 - 1600 rpm Engine capacity: 4.25 litres IVECO NEF 4 cyl. Common Rail Turbo / EuroMot TIER3 Engine output: 104 kW (141 DIN horsepower) Max. rpm: 2200 rpm Max. torque: 608 Nm at 1600 rpm Engine capacity: 4.5 litres Transmission: HSM High Speed Drive (71 series) • 2-step NAF transfer gearbox Axles: • Planetary axles • 100% separately selectable differential locks, front and rear Brake: • 2-circuit brake, disk brake running in an oil bath • Spring-loaded...

Adler HY 20 (2 x 100 kN) double-drum winch Max. cable take-up of 14 mm, 100 m • Optional: Adler HY 24-SG (2 x 120 kN) double-drum winch Max. cable take-up of 14 mm, 130 m Adler HY 32-SG (2 x 160 kN) double-drum winch Max. cable take-up of 16 mm, 100 m Adler HY 20 (2 x 100 kN) double-drum winch Max. cable take-up of 14 mm, 100 m • Optional: Adler HY 24-SG (2 x 120 kN) double-drum winch Max. cable take-up of 14 mm, 130 m Weight: • 13900 kg (standard) Weight distribution: Front axle: Rear axle: Weight: • 11500 kg (standard) Weight distribution: Front axle: Rear axle: Forwarder: • Epsilon S120 -...

Adler HY 16 (2 x 80 kN) double-drum winch Max. cable take-up of 14 mm, 100 m • Optional: Adler HY 20 (2 x 100 kN) double-drum winch Max. cable take-up of 14 mm, 100 m Adler HY 16 (2 x 80 kN) double-drum winch Max. cable take-up of 14 mm, 100 m • Optional: Adler HY 20 (2 x 100 kN) double-drum winch Max. cable take-up of 14 mm, 100 m Tyres: • Series: Size: Minimum width: At the front: 23.1 x 26 2550 mm At the rear: 710/40x22.5 The minimum width changes when using belts (+100). Other tyres on request. • Series: Size: Minimum width: At the front: 23.1 x 26 2550 mm At the rear: 710/40x22.5 Standard...

Variable last stanchion in "Short" position Variable last stanchion in "Medium" position Rope forwarding possible without reconguring the stanchion Variable last stanchion in "Long" position Log forwarding with quick-change clamping workbench Quick-change twin stanchion for 2 x 2 or 2 x 2.5 m wood (not for 805F short version) Rope forwarding possible without reconguring the clamping workbench

Crane type O = standard equipment # = not available Lifting moment Gripper type Mesera Loglift Various toolboxes, for example for power saws Problem-free mulch mode with hydraulic performance from HSM Low crane pillar (height: 1730 mm) "Hauer" front loader for more exibility HSM Hohenloher SpezialMaschinenbau GmbH & Co. KG Technik die Freude macht. D-74635 Neu-Kupfer Im Greut 10 Phone + 49 7944 / 9191-0 Fax + 49 7944 / 9191-77 E-mail: [email protected] www.hsm-forest.com Subject to technical modications. July 2014 revision status X = available with surcharge