HSM 208F Kombi Model
1 /6Pages

HSM 208F Kombi Model

HSM 208F Kombi Model
1 /6Pages

Catalog excerpts

HSM 208F Kombi Model-2

Technical data 208F Kombi Brake: Power train: • brake with 2-circles, oil-cooled multiple-disc power-brake • spring accumulator - parking brake Steering: • articulated frame steering witj 2 cylinders • steering angle 45° raisable to side on parallel linkages ROPS, FOPS, OPS tested rotary seat with pedals in front and rear wiper in front and rear, optional on the side air cushioned seat hot-water heating air conditioning • 1-hydrostat-engine • NAF 2 speed transfer gearbox • optional: HSM High Speed Drive (serial 71) speed at 1st gear 0-16 km/h Standard equipment: • • • • • • • • • Electrical system...

 Open the catalog to page 2
HSM 208F Kombi Model-3

Weight ”short“ / ”long“: • 15 000 kg / 15 200 kg Tires: • serial: Load capacity: Winches: - Adler double-drum-winch HY 16 (2x80 kN) max. rope capacity 100 m at 14 mm • optional: - Adler double-drum-winch HY 20 (2x100 kN) max. rope capacity 100 m at 14 mm Crane: • serial: • other cranes behold crane-list by using tracks the min. width will change (+100 mm). other tires on request Standard equipment: • grid and rst rung demountable • last rung demountable and displaceable to loading length (short) 1,85 m, 2,65 m and 3,2 m (long) 2,35 m, 3,15 m and 3,7 m • roller-block, high adjustable • oscillation...

 Open the catalog to page 3
HSM 208F Kombi Model-4

Weight ”short“ / ”long“: • 18 000 kg / 18 200 kg (serial) Tires: • serial: Load capacity: Winches: - Adler double-drum-winch HY 20 (2x100 kN) max. rope capacity 100 m at 14 mm • optional: - Adler double-drum-winch HY 24 SG (2x120 kN) max. rope capacity 130 m at 14 mm - Adler double-drum-winch HY 32 L-SG (2x160 kN) max. rope capacity 140 m at 16 mm Crane: • serial: • other cranes behold crane-list by using tracks the min. width will change (+100 mm). other tires on request Standard equipment: • grid and rst rung demountable • last rung demountable and displaceable to loading length (short) 2,4...

 Open the catalog to page 4
HSM 208F Kombi Model-5

The clever bunk design Variable last rung at position ”short“ Variable last rung at position ”middle“ Skidding by rope possible without demounting the rung Variable last rung at position ”long“ Skidding of long timper by quick-changeable clam-bunk Quick changeable ”Twin-rung“ for 2 x 2 or 2 x 2,5 m logs (not at 805F version ”short“) Skidding by rope possible without demounting the clam-bunk

 Open the catalog to page 5
HSM 208F Kombi Model-6

X = available against surcharge low crane column (height 1730 mm) series at steep slope and kombi HSM Hohenloher SpezialMaschinenbau GmbH & Co. KG Technik die Freude macht. D-74635 Neu-Kupfer Im Greut 10 Tel. + 49 (0) 7944 / 9191-0 Fax + 49 (0) 7944 / 9191-77 Mail: [email protected] www.hsm-forest.com Technical subject to change. July 2014 lift moment Mesera Loglift

 Open the catalog to page 6

All HSM - Hohenloher Spezial-Maschinenbau GmbH & Co. K catalogs and technical brochures

  1. HSM_805_Reihe

    2  Pages

  2. HSM_208F_4Zyl

    2  Pages

  3. HSM_208F_6Zyl

    2  Pages

  4. HSM_FoSyDrive

    2  Pages

  5. HSM_904_Reihe

    2  Pages

  6. HSM 208F 12 T

    2  Pages

  7. HSM 208F 9 T

    2  Pages

  8. HSM 904ZL

    6  Pages

  9. HSM 405H1 6WD

    2  Pages

  10. Forwarder

    15  Pages

  11. HSM 208

    2  Pages

  12. HSM 904

    6  Pages

  13. HSM 805

    6  Pages

  14. HSM 805S

    2  Pages

  15. HSM 704

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.