MTC (Manual Tool Change) Electrospindles

Product catalog summary

Overview: The document provides technical specifications and details for various models of Manual Tool Change Electrospindles (MTC Spindles) produced by HSD Mechatronics. These spindles are used in various industries such as aerospace, automotive, consumer electronics, and furniture manufacturing.

Specifications:

Models: The document lists several models including MT-R 1055-090, MT-R 1073-120, MT-R 1090-140, and MT-R 1120-170, among others.
Taper Types: The spindles use different taper types such as HSK C32, HSK C40, HSK C63, and various collet types like ER20, ER25, ER32, and ER40.
Power Ratings: Power ratings are provided for both continuous (S1) and intermittent (S6) operations, ranging from 0.65 kW to 13.5 kW for S1 and up to 16.2 kW for S6.
Speed: Rated speeds range from 6000 rpm to 24000 rpm, with maximum speeds reaching up to 30000 rpm depending on the model.
Voltage: The spindles operate on either 220V or 380V, with some models supporting both.
Cooling Systems: Cooling methods include shaft-driven fans, electric fans, and liquid cooling systems.
Weight: The weight of the spindles varies from approximately 3.5 kg to 35 kg.

Procedures and Recommendations:

The document emphasizes the importance of adhering to the specified power, speed, and voltage ratings to ensure optimal performance and longevity of the spindles.
It also highlights the need for proper cooling to prevent overheating and potential damage.

Additional Information:

The document notes that technical data and illustrations are subject to change as part of ongoing product improvements by HSD Mechatronics.
Contact information for various regional offices is provided, including websites for the USA, Germany, China, Korea, and Taiwan.

Catalog excerpts

MTC (Manual Tool Change) Electrospindles-1

Elettromandrini Cambio Utensile Manuale Manual Tool Change Electrospindles HSDMECHATRONICS MORE VALUE FOR YOUR MACHINE.

Open the catalog to page 1

MTC (Manual Tool Change) Electrospindles-2

MTC Gamma Cambio Rapido Utensile MTC Quick Tool Change Range

Open the catalog to page 2

MTC (Manual Tool Change) Electrospindles-3

Technical data and illustrations are not binding and, for the sake of continual improvement of its products, HSD Mechatronics reserves the right to make modifications without prior notice HSDMECHATRONICS MTC Gamma Pinza - Liquido MTC Collet Range - Liquid [kW] S1 [Nm] S1 MTC Gamma Pinza - Ventola Calettata MTC Collet Range - Shaft Driven Fan

Open the catalog to page 3

MTC (Manual Tool Change) Electrospindles-4

MTC Gamma Pinza - Elettroventola MTC Collet Range - Electric Fan MTC Gamma Linguetta MTC Keyed Range Attacco Taper Potenza S1/S6 Power S1/S6 Velocità Nominale Rated Speed Velocità Massima Max Speed Tensione Nominale Rated Voltage Raffreddamento Cool

Open the catalog to page 4

MTC (Manual Tool Change) Electrospindles-5

AEROSPACE AUTOMOTIVE AEROSPACE CONSUMER ELECTRONICS WINDOWS & FURNITURE ROBOTICS ELECTRONICS CONSUMER FORNITURE AUTOMOTIVE BUILDINGS. HIGH TECH. hsd.it hsddeutschland.de hsdusa.com hsdusa.com hsddeutschland.de hsd-china.cn hsd-china.cn hsdkorea.kr hsdkorea.kr hsd-taiwan.com.tw

Open the catalog to page 5

All HSD catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list