- Catalogs
- HS INDUSTRIES SRL
- C60E W. NR. 1.1221
C60E W. NR. 1.1221
1 / 1 PageView full catalog
C60E W. NR. 1.1221
Product catalog summary
Linear Shafts Overview
This document provides technical specifications for C60E WN. 1.1221 linear shafts, focusing on mechanical properties, chemical composition, dimensional tolerances, and manufacturing details.
This document provides technical specifications for C60E WN. 1.1221 linear shafts, focusing on mechanical properties, chemical composition, dimensional tolerances, and manufacturing details.
Mechanical Properties
The shafts are hot rolled and quenched and tempered according to EN 10083-2: 2006 standards. Key mechanical properties include:
The shafts are hot rolled and quenched and tempered according to EN 10083-2: 2006 standards. Key mechanical properties include:
- Tensile Strength (R): 650 - 710 N/mm²
- Yield Strength (Rp 0.2): 310 - 380 N/mm² minimum
- Elongation (A%): Minimum 11%
- Hardness (HB): 200 - 218
Chemical Composition
The chemical analysis of the shafts includes:
The chemical analysis of the shafts includes:
- Carbon (C%): 0.57 - 0.65
- Silicon (Si%): Maximum 0.40
- Manganese (Mn%): 0.6 - 0.9
- Phosphorus (P%): Maximum 0.030
- Sulfur (S%): Maximum 0.035
- Chromium (Cr%): Maximum 0.40
- Molybdenum (Mo%): Maximum 0.10
- Nickel (Ni%): Maximum 0.40
Dimensional Specifications
The document details various diameters ranging from 6 mm to 100 mm, with corresponding weights, tolerances, lengths, surface hardness, and other parameters. Key points include:
The document details various diameters ranging from 6 mm to 100 mm, with corresponding weights, tolerances, lengths, surface hardness, and other parameters. Key points include:
- Surface Hardness: 62 - 64 HRC
- Hardness Depth: 0.6 - 4.5 mm depending on diameter
- Straightness: Maximum 5 mm/m
- Roundness and Conicity: Maximum 5 μ
- Surface Finish: 0.20 - 0.25 μ RA
Manufacturing Program
The shafts are available as hardened chromed shafts with a chrome thickness of 8/15 μ, tolerance ISO h6, and chrome film hardness of 950/1100 HV.
The shafts are available as hardened chromed shafts with a chrome thickness of 8/15 μ, tolerance ISO h6, and chrome film hardness of 950/1100 HV.
Contact Information
HS Industries s.r.l. is located in Pontirolo Nuovo, Italy. Contact details include phone numbers, fax, email, and website.
HS Industries s.r.l. is located in Pontirolo Nuovo, Italy. Contact details include phone numbers, fax, email, and website.
See more
Catalog excerpts
LINEAR SHAFTSC60E WN. 1.1221 Chemical Analysis HARDENED CHROMED SHAFTS: Chrome thickness 8/15 |j - Tollerance ISO h6 - Chrome film hardness 950/1100 HV Via Francesca Vecchia snc - 24040 Pontirolo Nuovo (BG) - Italy
Open the catalog to page 1All HS INDUSTRIES SRL catalogs and technical brochures
50CRMO4 Q+T W.NR. 1.72281 Page
42CRMO4 Q+T W.NR. 1.72251 Page
X105CRMO17 W.NR. 1.41251 Page
X90CRMOV18 W.NR: 1.41121 Page
X46CR13 W.NR. 1.40341 Page
C60E WN. 1.12211 Page
CF53 W. NR. 1.12131 Page
Related Searches
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.