Rockwell hardness tester This model has been developed to perform tests using the Rockwell scale (with loads of 60, 100 and 150 kp), and the Rockwell superficial scale (loads of 15, 30 and 45 kp), but can also apply additional loads for other tests, como Brinell o Vickers. It is comprised of a motorised frame, which includes the load application systems (which employ a computer controlled force transducer). The indentation depth is measured using by a sensor with a resolution of 0.1 microns (0.0001 mm). The Rockwell system is used to test parts made of metal, plastic, rubber, etc.

Included accessories: • 120º diamond cone Rockwell indenter. • 1/16” hard metal ball Rockwell indenter. • 2.5 and 5 mm diameter hard metal ball Brinell indenter. • Hard metal balls (spare) in each of the aforementioned diameters. • Templates for Rockwell (HRC, HRBW). • Support tables with horizontal support for flat pieces (Ø50 mm y Ø10 mm). • Support tables with V-shaped support for cylindrical pieces. • I

Rockwell superficial scale loads kgf Rockwell scale loads kgf Brinell loads Vickers loads Load application rate Test load selection Load cell Automatically adjusted Via touch screen HBM® (international leader in this technology) Vertical capacity Goose neck (horizontal) Computer integrated in the machine Read-out system Direct read-out on 21.5” touch screen Statistical calculations (median, deviation, travel, etc.) Results in .pdf reports and .csv format Hoytom is a registered trademark of Hoytom S.L. Hoytom reserves the right to alter specifications without prior notice.

Year Warranty with all Hoytom® machines When you purchase a Hoytom® machine the equipment comes with a 3 year warranty. Die Maschine www.hoytom.com [email protected] youtube.com/hoytom hoytom hoytom