Rockwell hardness tester This model has been developed to perform tests using the Rockwell scale (with loads of 60, 100 and 150 kp), and the Rockwell superficial scale (loads of 15, 30 and 45 kp), but can also apply additional loads for other tests, such as Brinell or Vickers. It is comprised of a motorised frame, which includes the load application systems (which employ a computer controlled force transducer). The indentation depth is measured using by a sensor with a resolution of 0.1 microns (0.0001 mm). The Rockwell system is used to test parts made of metal, plastic, rubber, etc. The Rockwell indenter can move horizontally and vertically to test different points on large parts.

Rockwell superficial scale loads kgf Rockwell scale loads kgf Other loads (Brinell) kgf Load application rate Test load selection Space between columns mm Read-out system Touch screen with microprocessor (Hoytom) Direct read-out on 15” touch screen Statistical calculations (median, deviation, travel, etc.) Results in database (.mdb)

Included accessories: • 120° diamond cone Rockwell indenter. • 1/16” hard metal ball Rockwell indenter. • 2.5 and 5 mm diameter hard metal ball Brinell indenter. • Hard metal balls (spare) in each of the aforementioned diameters. • Templates for Rockwell (HRC, HRBW). • Height adjustable support table. • Support tables with horizontal support for flat pieces (050 mm y 010 mm). • Support tables with V-shaped support for cylindrical pieces. • Instruction manual. Hoytom is a registered trademark of Hoytom S.L. Hoytom reserves the right to alter specifications without prior notice.

with all Hoytom® machines When you purchase a Hoytom® machine the equipment comes with a 3 year warranty. www.hoytom.com [email protected]