1. Catalogs
  2. Howdon Torque limiters
  3. Wedgegard® Type S HUB Coupling (in-lb)
video corpo

Wedgegard® Type S HUB Coupling (in-lb)

Wedgegard® Type S HUB Coupling (in-lb)

Product catalog summary
Overview: The document provides technical specifications for Howdon Power Transmission Limited's Type S Wedgegard Units, which can be equipped with a Chainwheel, Pulley, or Gear. These units are designed for release torques up to 1,311,017 in/lb, with torque adjustability via Wedgepin ratings.
Specifications: The units range from S250 to S1600, with S250 to S950 available from stock and S1000 to S1600 built to order. The document includes detailed specifications such as maximum release/shear torque, wedgeslot quantity, pin working radius, maximum bore, outside diameter, overall length, spigot diameter, spigot length, bolt fixing quantity and size, fixing bolt P.C.D., and approximate weight.
Key Parameters: - Maximum release/shear torque varies by material (Brass or Steel) and unit size. - Wedgeslot quantity and type increase with unit size, affecting torque capacity. - Dimensions are provided in inches, with specific measurements for each unit size.
Recommendations: - Systems to automatically switch off the motor are required for drives with shaft speeds above 120 rpm. - Consultation with Howdon is advised for speeds over 500 rpm.
Additional Notes: - Some units may have extra wedgeslots for increased torque capacity, which should be used according to drive overload requirements and shaft keyway stresses. - Dimensions and specifications are subject to change without notice for improvement.
See more

Catalog excerpts

Wedgegard® Type S HUB Coupling (in-lb)-1

Wedgegard® Type S HUB - Manual Reset ‘Dimensions and specifications may change for improvement without notice. Type S Wedgegard Units can be supplied fitted with Chainwheel, Pulley or Gear. Standard Units for release torques up to 1,311,017 in/lb. Torque is adjustable by Wedgepin ratings. NOTE - Some units may have extra Wedgeslots for increased Torque Capacity, these should only be used in accordance with your drives maximum overload requirements and shaft keyway stresses. Units S250 to S950 supplied from stock, S1000 to S1600 are built to order, thus dimensions can be adjusted to customer requirements. Systems to switch off motor automatically must be used for drives with shaft speed above 120 rpm. For speeds over 500 rpm, please consult Howdon. All dimensions in mm. © Howdon Power Transmission Limited. Web: www.howdon.co.uk Twitter @HowdonPower

 Open the catalog to page 1

All Howdon Torque limiters catalogs and technical brochures

  1. SOBO® iQ

    1  Page

  2. Svendborg Brakes

    112  Pages

  3. DB 2002

    2  Pages

  4. DB 2009

    2  Pages

  5. DS2508

    2  Pages

  6. Brake Discs

    1  Page

  7. PFS Coupling

    1  Page

  8. DFS Coupling

    1  Page

  9. NFS Coupling

    1  Page

  10. Type S HUB

    1  Page

  11. Disc Hubs

    1  Page

  12. Phasing Hubs

    1  Page

  13. DS1508

    2  Pages

  14. DS1507

    2  Pages

  15. DS1003

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.