1. Catalogs
  2. Howdon Torque limiters
  3. Wedgegard® Type S HUB Coupling (ft-lb)
video corpo

Wedgegard® Type S HUB Coupling (ft-lb)

Wedgegard® Type S HUB Coupling (ft-lb)

Product catalog summary
Overview: The document provides technical specifications for Howdon Power Transmission's Type S Wedgegard Units, which can be equipped with a chainwheel, pulley, or gear. These units are designed for release torques up to 109,251 ft/lb, with torque adjustability via Wedgepin ratings.
Specifications: The units range from S250 to S1600, with S250 to S950 available from stock and S1000 to S1600 built to order. Dimensions can be customized for the latter. The document includes detailed specifications such as maximum release/shear torque, wedgeslot quantity, pin working radius, maximum bore, outside diameter, overall length, spigot diameter and length, bolt fixing quantity and size, fixing bolt P.C.D., and approximate weight.
Operational Guidelines: Systems must automatically switch off the motor for drives with shaft speeds above 120 rpm. Consultation with Howdon is recommended for speeds over 500 rpm. The document notes that some units may have extra wedgeslots for increased torque capacity, which should be used according to the drive's maximum overload requirements and shaft keyway stresses.
Materials: The units are available in brass and steel, with specific maximum release/shear torque values provided for each material type.
Important Notes: All dimensions are provided in millimeters, and specifications may change without notice for improvement purposes.
See more

Catalog excerpts

Wedgegard® Type S HUB Coupling (ft-lb)-1

Wedgegard® Type S HUB - Manual Reset ‘Dimensions and specifications may change for improvement without notice. Type S Wedgegard Units can be supplied fitted with Chainwheel, Pulley or Gear. Standard Units for release torques up to 109,251 ft/lb. Torque is adjustable by Wedgepin ratings. NOTE - Some units may have extra Wedgeslots for increased Torque Capacity, these should only be used in accordance with your drives maximum overload requirements and shaft keyway stresses. Units S250 to S950 supplied from stock, S1000 to S1600 are built to order, thus dimensions can be adjusted to customer requirements. Systems to switch off motor automatically must be used for drives with shaft speed above 120 rpm. For speeds over 500 rpm, please consult Howdon. All dimensions in mm. © Howdon Power Transmission Limited. Web: www.howdon.co.uk Twitter @HowdonPower

 Open the catalog to page 1

All Howdon Torque limiters catalogs and technical brochures

  1. SOBO® iQ

    1  Page

  2. Svendborg Brakes

    112  Pages

  3. DB 2002

    2  Pages

  4. DB 2009

    2  Pages

  5. DS2508

    2  Pages

  6. Brake Discs

    1  Page

  7. PFS Coupling

    1  Page

  8. DFS Coupling

    1  Page

  9. NFS Coupling

    1  Page

  10. Type S HUB

    1  Page

  11. Disc Hubs

    1  Page

  12. Phasing Hubs

    1  Page

  13. DS1508

    2  Pages

  14. DS1507

    2  Pages

  15. DS1003

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.