1. Catalogs
  2. Howdon Torque limiters
  3. Wedgegard® Type DIN Spacer (in-lb)
video corpo

Wedgegard® Type DIN Spacer (in-lb)

Wedgegard® Type DIN Spacer (in-lb)

Product catalog summary
Product Overview: The Wedgegard® Type DIN Spacer with Manual Reset is designed to fit standard DIN Universal Joint (UJ) companion flanges. It features adjustable release torque through Wedgepin ratings, with the maximum release torque determined by the Wedgepin capacity rather than the UJ shaft capacity. An adaptor flange may be necessary for fitting to a PTO Gear Box Flange, and spigot diameters may vary for higher-rated UJ shafts. Sizes 150 and above include face keyways.
Specifications: The product is available in various sizes, from DIN 90 to DIN 435, with corresponding UJ shaft sizes. The maximum release/shear torque varies between brass and steel materials, with steel offering higher torque capacities. The number of wedgeslots and type of Wedgepin also vary by size, affecting the pin working radius, outside diameter, length, clearance diameter, spigot diameter, and bolt fixing specifications.
Recommendations: When selecting for high overloads, it is advised to limit the release torque to 90% of the UJ shaft manufacturer's full load rating. Non-standard units can be custom-made to order.
Key Dimensions: All dimensions are provided in millimeters. The document includes detailed measurements for each size, including pin working radius, outside diameter, length, clearance diameter, spigot diameter, bolt fixing quantity and size, and bolt fixing P.C.D.
See more

Catalog excerpts

Wedgegard® Type DIN Spacer (in-lb)-1

Wedgegard® Type DIN Spacer - Manual Reset HOUUDOnTORQUE LIMITERS Fits standard DIN UJ (Universal Joint) companion flanges. Release torque is adjustable by Wedgepin ratings. The maximum release torque is based on maximum Wedgepin capacity and not UJ shaft capacity- Check your UJ shaft manufacturers max load rating. Adaptor Flange maybe required when fitting to PTO Gear Box Flange. Spigot diameters may change on higher rated UJ shafts. Sizes 150 and above are supplied with face keyways. When selecting high overloads always limit the release torque to 90% of UJ shaft manufacturers full load rating. Non Standard units can be made to order. All dimensions in mm. *All figures are approximate. ‘Dimensions in mm unless otherwise shown. ‘Dimensions and specifications may change for improvement without notice. © Howdon Power Transmission Limited. Web: www.howdon.co.uk Twitter @HowdonPower

 Open the catalog to page 1

All Howdon Torque limiters catalogs and technical brochures

  1. SOBO® iQ

    1  Page

  2. Svendborg Brakes

    112  Pages

  3. DB 2002

    2  Pages

  4. DB 2009

    2  Pages

  5. DS2508

    2  Pages

  6. Brake Discs

    1  Page

  7. PFS Coupling

    1  Page

  8. DFS Coupling

    1  Page

  9. NFS Coupling

    1  Page

  10. Type S HUB

    1  Page

  11. Disc Hubs

    1  Page

  12. Phasing Hubs

    1  Page

  13. DS1508

    2  Pages

  14. DS1507

    2  Pages

  15. DS1003

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.