1. Catalogs
  2. Howdon Torque limiters
  3. Wedgegard® GEAR Type Coupling (in-lb)
video corpo

Wedgegard® GEAR Type Coupling (in-lb)

Wedgegard® GEAR Type Coupling (in-lb)

Product catalog summary
Overview: The document provides technical specifications for the Wedgegard® Gear Type Coupling with a manual reset feature, manufactured by Howdon Power Transmission Limited. These couplings are designed to meet AGMA standards and are customizable to customer requirements.
Specifications:
  • Release torques available up to 286,800 Nm, adjustable via Wedgepin ratings.
  • Maximum operational speed is 500 RPM; higher speeds require balancing.
  • Dimensions are provided in millimeters unless otherwise specified.
Torque and Dimensions:
  • Nominal drive torque ranges from 9,770 in-lbs to 1,166,000 in-lbs depending on the size.
  • Max release/shear torque varies between brass and steel materials, with steel offering higher values.
  • Sizes range from 1 to 7, with corresponding specifications for each size including outside diameter, clearance diameter, spacer length, overall length, shaft gap, and bolt fixing details.
Design Features:
  • Wedgeslot quantity and Wedgepin type vary by size, affecting the torque capacity and operational characteristics.
  • Pin Working Radius (PWR) and unbalanced speed are specified for each size, indicating the mechanical limits and performance.
  • Max bore sizes for gear coupling hubs are provided, indicating the maximum shaft diameter that can be accommodated.
Weight and Construction:
  • Cartridge weight and total weight including gear coupling are listed for each size, indicating the mass and potential handling requirements.
  • Flange bolt P.C.D. and bolt fixing details are specified, ensuring compatibility with various installation setups.
Additional Notes:
  • All figures are approximate and subject to change for improvement without notice.
  • Contact information for Howdon Power Transmission Limited is provided for further inquiries.
See more

Catalog excerpts

Wedgegard® GEAR Type Coupling (in-lb)-1

HOUUDOn TORQUE LIMITERS Wedgegard® Gear Type Coupling - Manual Reset Gear Type Wedgegard Couplings can be supplied bored and keyed to customer requirements. All Couplings manufactured to AGMA standards. Standard Units for release torques up to 286,800 Nm. Torque is adjustable by Wedgepin ratings. Designs to suit special drive requirements are available. Maximum Speed 500 RPM. For speeds greater than 500 RPM units should be balanced. All dimensions in mm unless otherwise shown. All figures are approximate. *All figures are approximate. ‘Dimensions in mm unless otherwise shown. ‘Dimensions and specifications may change for improvement without notice. © Howdon Power Transmission Limited. Web: www.howdon.co.uk Twitter @HowdonPower

 Open the catalog to page 1

All Howdon Torque limiters catalogs and technical brochures

  1. SOBO® iQ

    1  Page

  2. Svendborg Brakes

    112  Pages

  3. DB 2002

    2  Pages

  4. DB 2009

    2  Pages

  5. DS2508

    2  Pages

  6. Brake Discs

    1  Page

  7. PFS Coupling

    1  Page

  8. DFS Coupling

    1  Page

  9. NFS Coupling

    1  Page

  10. Type S HUB

    1  Page

  11. Disc Hubs

    1  Page

  12. Phasing Hubs

    1  Page

  13. DS1508

    2  Pages

  14. DS1507

    2  Pages

  15. DS1003

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.