Overview: The Wedgegard® DIN Torque Table provides torque ratings for various DIN codes, indicating the torque capacity in ft/lbs for different configurations of Wedgepins. The document notes that dimensions and specifications may change without notice for improvements.
Key Sections:
- DIN Codes: The table lists torque ratings for a series of DIN codes ranging from DIN 90 to DIN 435. Each code corresponds to specific torque values under different configurations.
- Torque Ratings: The ratings are provided for different configurations, including W37, W50, W75, W100, W120, and others. Each configuration has multiple sub-categories such as B, S, O, OW, GD, W, WY, Y, YB, BN, B, BG, G, RG, R, RK, and K, each with specific torque values.
- Configuration Details: Each configuration represents a different setup of Wedgepins, affecting the torque capacity. For example, the 'W' configuration for DIN 90 has a torque rating of 243 ft/lbs, while the 'Y' configuration for the same DIN code has a rating of 465 ft/lbs.
Critical Information:
- Ratings: The torque ratings are approximate and are based on a full complement of Wedgepins fitted.
- Specifications: The document emphasizes that specifications may change for improvement without prior notice.
Contact Information: For further inquiries, Howdon Power Transmission Limited can be contacted via phone at +44(0) 1453 750814, email at
[email protected], or through their website www.howdon.co.uk.
See more