video corpo

Type SAE Spacer

Type SAE Spacer

Product catalog summary
Product Overview: The Wedgegard® Type SAE Spacer with Manual Reset is designed to fit standard SAE Universal Joint (UJ) companion flanges. It features adjustable release torque through Wedgepin ratings, with the maximum release torque determined by the Wedgepin capacity rather than the UJ shaft capacity. Users are advised to verify the maximum load rating with their UJ shaft manufacturer and limit the release torque to 90% of the full load rating for high overloads.
Specifications:
  • Dimensions are provided in millimeters and may change without notice for improvement.
  • Available sizes range from SAE 14 to SAE 80, corresponding to UJ Shaft Sizes from 1140 to 1800.
  • Maximum release/shear torque varies by material: Brass ranges from 1941 Nm to 19840 Nm, and Steel ranges from 2670 Nm to 27240 Nm.
  • Wedgeslot quantity and Wedgepin type vary by size, with configurations such as 3 x W37 and 4 x W75.
  • Pin Working Radius (PWR) ranges from 45 mm to 100 mm.
  • Outside Diameter (A) ranges from 100 mm to 205 mm.
  • Length (L) ranges from 36 mm to 63 mm.
  • Clearance Diameter (C) ranges from 115 mm to 250 mm.
  • Spigot Diameter (D) ranges from 57.15 mm to 196.82 mm.
  • Bolt fixing configurations vary, including sizes like 4 x M8 and 12 x M10, with Bolt Fixing P.C.D. ranging from 69.8 mm to 184.2 mm.
Important Considerations: Ensure compatibility with UJ shaft specifications and adhere to recommended torque limits to prevent equipment damage. Dimensions and specifications are subject to change, and all figures are approximate.
See more

Catalog excerpts

Type SAE  Spacer-1

Wedgegard® Type SAE Spacer - Manual Reset HOUUDOnTORQUE LIMITERS Fits standard SAE UJ (Universal Joint) companion flanges. Release torque is adjustable by Wedgepin ratings. The maximum release torque is based on maximum Wedgepin capacity and not UJ shaft capacity- Check your UJ shaft manufacturers max load rating. Spigot diameters may change on higher rated UJ shafts. When selecting high overloads always limit the release torque to 90% of UJ shaft manufacturers full load rating. All dimensions in mm. *All figures are approximate. ‘Dimensions in mm unless otherwise shown. ‘Dimensions and specifications may change for improvement without notice. © Howdon Power Transmission Limited. Web: www.howdon.co.uk Twitter @HowdonPower

 Open the catalog to page 1

All Howdon Torque limiters catalogs and technical brochures

  1. SOBO® iQ

    1  Page

  2. Svendborg Brakes

    112  Pages

  3. DB 2002

    2  Pages

  4. DB 2009

    2  Pages

  5. DS2508

    2  Pages

  6. Brake Discs

    1  Page

  7. PFS Coupling

    1  Page

  8. DFS Coupling

    1  Page

  9. NFS Coupling

    1  Page

  10. Type S HUB

    1  Page

  11. Disc Hubs

    1  Page

  12. Phasing Hubs

    1  Page

  13. DS1508

    2  Pages

  14. DS1507

    2  Pages

  15. DS1003

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.