*mydirectindustry

Type CFS Coupling

Product catalog summary

Overview: The document provides technical specifications for the Type CFS Wedgegard couplings, which integrate a Centaflex half coupling with a Wedgegard torque limiter. These units are customizable to customer requirements and are available in standard units for release torques up to 64,000 Nm. The torque is adjustable via Wedgepin ratings, and the standard finish is either natural or chemically blacked.

Specifications: All dimensions are provided in millimeters. The document notes that dimensions and specifications may change for improvement without notice.

Model Specifications:

CFS 350-135: Nominal Drive Torque: 300 Nm, Max Release Torque: 2785 Nm, Wedgepin: 3 x W37, Diameter: 47 mm, Length: 135 mm, Min Shaft Gap: 60 mm, Max Bores: 35 mm, Max Length: 129 mm, Shaft Gap: 4 mm.
CFS 500-160: Nominal Drive Torque: 600 Nm, Max Release Torque: 3230 Nm, Wedgepin: 3 x W37, Diameter: 54.5 mm, Length: 160 mm, Min Shaft Gap: 60 mm, Max Bores: 50 mm, Max Length: 181 mm, Shaft Gap: 10 mm.
CFS 500-198: Nominal Drive Torque: 1200 Nm, Max Release Torque: 3230 Nm, Wedgepin: 3 x W37, Diameter: 54.5 mm, Length: 198 mm, Min Shaft Gap: 75 mm, Max Bores: 50 mm, Max Length: 195 mm, Shaft Gap: 10 mm.
CFS 700-220: Nominal Drive Torque: 2500 Nm, Max Release Torque: 7700 Nm, Wedgepin: 3 x W50, Diameter: 77 mm, Length: 220 mm, Min Shaft Gap: 85 mm, Max Bores: 70 mm, Max Length: 218 mm, Shaft Gap: 10 mm.
CFS 700-275: Nominal Drive Torque: 5000 Nm, Max Release Torque: 7700 Nm, Wedgepin: 3 x W50, Diameter: 77 mm, Length: 275 mm, Min Shaft Gap: 100 mm, Max Bores: 70 mm, Max Length: 238 mm, Shaft Gap: 10 mm.
CFS 950-350: Nominal Drive Torque: 10000 Nm, Max Release Torque: 21555 Nm, Wedgepin: 3 x W75, Diameter: 105.5 mm, Length: 350 mm, Min Shaft Gap: 130 mm, Max Bores: 100 mm, Max Length: 320 mm, Shaft Gap: 15 mm.
CFS 1000-425: Nominal Drive Torque: 20000 Nm, Max Release Torque: 64000 Nm, Wedgepin: 4 x W100, Diameter: 128 mm, Length: 425 mm, Min Shaft Gap: 160 mm, Max Bores: 115 mm, Max Length: 359 mm, Shaft Gap: 15 mm.

Contact Information: For further inquiries, contact Howdon Power Transmission Limited via phone at +44(0) 1453 750814, email at [email protected], or visit their website at www.howdon.co.uk.

Catalog excerpts

Wedgegard Type CFS Coupling - Manual Reset HOUUDOnTORQUE LIMITERS Type CFS Wedgegard couplings combine a Centaflex half coupling with the Wedgegard torque limiter. Units can be supplied bored and keywayed to customer requirements. Standard Units for release torques up to 64,000 Nm. Torque is adjustable by Wedgepin ratings. Standard finish - Natural or Chemically Blacked. All dimensions in mm. *Dimensions and specifications may change for improvement without notice. © Howdon Power Transmission Limited. Web: www.howdon.co.uk Twitter @HowdonPower

Open the catalog to page 1

All Howdon Torque limiters catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list