MXSH Disc Brake Caliper - Spring Applied, Hydraulically Released Nominal dimensions given For caliper dimensions see DS2500 Weight MXSH 9.6 caliper and thruster - 11.6kg MXSH 7.5 caliper and thruster - 11.4kg MXSH 4.6 caliper and thruster - 11.0kg Caliper only - 7.0kg Volume displacement of thruster at 6mm Retraction is 9.1 ml Maximum pressure - 120 bar The ratings shown on the above graph are based on fully bedded and conditioned brake pads with nominal friction coefficient j = 0.4. For bedding-in and conditioning procedures see Publication M1060. Braking Force is defined as the Tangential Force acting on the brake disc at the Effective Disc Radius. Braking Torque (Nm) = Braking Force (N) x Effective Disc Radius (m) where Effective Disc Radius = Actual Disc Radius - 0.033. Twiflex Disc Brakes must be used with Twiflex asbestos free brake pads. The use of any other brake pads will invalidate the warranty. Twiflex Limited reserves the right to modify or change the design without prior notice.

MXSH Disc Brake Caliper - Spring Applied Hydraulically Released M6 nut and bolt Front cover 114 (Fully Extended) 79 (Fully Retracted) AVAILABLE SPARES Caliper Arms Item Component Part No. 1 Seal Kit 6000356 Thruster Part Number: XSH 9.6 7500357 XSH 7.5 7500147 XSH 4.6 7500163 Front cover This thruster requires no routine maintenance but if it becomes necessary to dismantle it for any reason, it is important to 'A' remember that it houses a powerful compressed spring. 32A/F The sequence in which it is dismantled should be as follows 6mm 1. Remove from caliper Push Rod Locknut Thruster 2. Unscrew...