A TwiflexLimitedMX13, 25, 30 and 40 Disc Brake Caliper Weight of caliper Total pad area Pad dimensions new Pad material -7.0kg -104cm2 (2pads) -60 x 90 x 13mm thick -Asbestos-free high friction material Allowable pad wear -8mm per pad The standard MX series brake caliper, is supplied as a right-hand assembly. (as shown above) Left-hand assembly can be supplied on request, or can easily be changed on site. Twiflex Disc Brakes must be used with Twiflex asbestos free brake pads. The use of any other brake pads will invalidate the warranty. Twiflex Limted reserves the right to modify or change the design without prior notice.

General Description The Twiflex MX13, MX25, MX30 & MX40 disc brake calipers are used with brake discs of 12.7, 25.4, 30 & 40mm thickness respectively. They may be used with any of the series of actuators listed below. Normally one or two units will be used per disc but the number may be increased, depending on disc size For bedding-in and conditioning procedures see publication M1060 Health and Safety data sheet reference to DS 0500 An Altra Industrial Motion Company