DS2008 MRL Disc Brake Caliper - Spring Applied, Hydraulically Released
2Pages

{{requestButtons}}

Catalog excerpts

DS2008 MRL Disc Brake Caliper - Spring Applied, Hydraulically Released - 1

DS2008 MRL Disc Brake Caliper - Spring Applied, Hydraulically Released Nominal dimensions given For caliper dimensions see DS2000 182 dia New pads 173 Worn pads 181 New pads 263.5 Worn pads 271.5 Weight (caliper and thruster) - 10.5kg (thruster only) - 4kg Volume displacement of thruster at 4mm retraction is 5ml Maximum working pressure 120 bar 20 Minimum Pressure for Full Retraction - bar Maximum Braking Force - kN Braking Torque - Nm ( Full Rate) The ratings shown on the above graph are based on fully bedded and conditioned brake pads with nominal friction coefficient μ = 0.4. For bedding-in and conditioning procedures see Publication M1060. Braking Force is defined as the Tangential Force acting on the brake disc at the Effective Disc Radius. Braking Torque (Nm) = Braking Force (N) x Effective Disc Radius (m) where Effective Disc Radius = Actual Disc Radius -0.03. Twiflex Disc Brakes must be used with Twiflex asbestos free brake pads. The use of any other brake pads will invalidate the warranty. Twiflex Limited reserves the right to modify or change the design without prior notice.

Open the catalog to page 1
DS2008 MRL Disc Brake Caliper - Spring Applied, Hydraulically Released - 2

MRL Disc Brake Caliper - Spring Applied, Hydraulically Released 182 dia 114 (Fully Extended) 79 (Fully retracted) Drain hole Thruster Part Number: Full Rate 7500092/AH37 182 dia 2/3rd Rate 7500102/AH38 1/3rd Rate 7500101/AH39 Caliper arms 114 (Fully Extended) 79 (Fully retracted) AVAILABLE SPARES Item Component Part No. 1 Seal Kit 7902806 2 Self Adjusting Repair Kit 7902805 Non self adjusting versions are available - contact Twiflex for details. Depending upon the service conditions it may eventually become necessary to replace the hydraulic seals. 6mm This is done as follows: Thruster...

Open the catalog to page 2

All Howdon Torque limiters catalogs and technical brochures

  1. SOBO® iQ

    1 Pages

  2. DB 2002

    2 Pages

  3. DB 2009

    2 Pages

  4. DS2508

    2 Pages

  5. Brake Discs

    1 Pages

  6. PFS Coupling

    1 Pages

  7. DFS Coupling

    1 Pages

  8. NFS Coupling

    1 Pages

  9. Type S HUB

    1 Pages

  10. Disc Hubs

    1 Pages

  11. Phasing Hubs

    1 Pages

  12. DS1508

    2 Pages

  13. DS1507

    2 Pages

  14. DS1003

    2 Pages