Catalogs >
Howdon Torque limiters >
DB2016 Disc Brake Caliper - Type T20 Hydraulically Applied

DB2016 Disc Brake Caliper - Type T20 Hydraulically Applied
2Pages

Catalog excerpts

DB2016 Disc Brake Caliper - Type T20 Hydraulically Applied - 1

DB2016 Disc Brake Caliper - Type T20 Hydraulically Applied Brake Disc Mounting Plate 74 Space Required For Pad Removal Minimum Disc Diameter 250mm for full Pad Coverage 13 M12 Bolts Grade 8-8 Tightening Torque 87Nm (64 Pounds-Feet) 23 Details of Mounting Plate Performance Data *Braking Force 20kN at 110 bar oil pressure (normal max. working pressure) Braking Torque (kNm) = Braking Force (kN)* x Effective Disc Radius (m) where Effective Disc Radius (m) = Actual Disc Radius (m) - 0.032. The above Braking Force figure is based on the standard pad friction coefficient µ=0.4. Disc Diameter Brake Perfomance of T20 Disc Brake Caliper The ratings shown on the above graph are based on fully bedded-in pads

Open the catalog to page 1

DB2016 Disc Brake Caliper - Type T20 Hydraulically Applied - 2

General Description The standard T20 disc brake caliper is used with 12.7mm thick standard Twiflex discs from 300mm and is cantilever mounted from a side plate. The split design of the T20 caliper also allows its use on thicker discs, in which case a spacer plate is sandwiched between the two caliper halves. The spacer plate may also serve as the mounting plate when the caliper is used with discs of 20mm thickness and upwards. Optionally, the caliper can be supplied in a modified form to suit discs under 12.7mm in thickness. The minimum recommended thickness in this case would be 8mm. It is...

Open the catalog to page 2