hotslot® Nozzle Heater with power distribution
2Pages

hotslot® Nozzle heater with power distribution í í í í í í Pressed-in coil heater with user-defined groove profile Reproducible power distribution Minimal wall thickness for reduced clearances Lowest power available in the middle of a nozzle Brass as cylinder raw material Same connection options as hotspring coil heaters Technical key features hotslot cylinder material Heater sheath material Lowest wall thickness Sheath temperature of heater Standard connection voltage High voltage test* Insulation resistance* Leakage current* Wattage tolerance Length tolerance Inner diameter tolerance Length unheated zone of coiled heater Length tolerance of unheated zone brass stainless steel 1.5 mm max. 450 °C / 840 °F 230 V 800 V AC ≥ 5 MOhm at 500 V DC < 0.5 mA at 253 V AC ± 10 % ± 0.5 mm + 0.05 mm flat heating element with power distribution flat heating element with seperate coil cylinder tube to insert a changeable thermocouple lowest wall thickness * tested at environmental temperature Options í H7 inner diameter tolerance available í Surface thermocouple í hotslot-cylinder with slot to insert a changeable thermocouple í Variouse plate configurations with cut-outs or bores available í Connection voltage from 12 V to 250 V í Serpentine coil í individual length and wattage Please observe operating instructions and safety information! · Errors and technical changes reserved · www.hotset.com · 03/2016+ SM

hotset hotslot®Nozzle heater with power distribution Type *Wattage depends on length, diameter and power distribution Stock range hotslot® Mini Dimensions products stock range hotslot® Mini Luz head1 65±15 mm LTC 115±35 mm Thermocouple Type L (Fe-CuNi), 0 1.0 mm (RD/BL), ungrounded Lhead max 40 mm dremoval bore3.2 ±a1 mm Connection CU-Ni-lead (BK/WH), PTFE-isolated, 2000 mm, max 260°C / 500°F, braided metal sleeving Please observe operating instructions and safety information! • Errors and technical changes reserved • www.hotset.com 03/2016+ SM Hotset America Corp. •...