Hot Disk TPS 500 brochure

Product catalog summary

Overview: The Hot Disk TPS 500 Thermal Constants Analyzer is designed for quick and accurate measurement of thermal conductivity, thermal diffusivity, and specific heat capacity across various materials, including solids, pastes, liquids, and powders. It operates within a temperature range of -100°C to 200°C and is noted for its simplicity and efficiency.

Key Features:

Simplicity: The next-generation software simplifies testing, requiring minimal sample preparation.
Rapidity: Most materials can be tested in under 20 seconds.
Sensors: Includes two sensors with radii of 3.2 mm and 6.4 mm, suitable for a range of materials.
Single-Sided Testing: Allows for testing when only one sample piece is available.
Temperature Control: Automated temperature series measurements are facilitated by optional accessories.

Advantages:

Non-destructive testing with no influence from surface roughness or color.
No calibration or reference sample verification required.
Instant and consistent results for thermal conductivity.

Specifications:

Thermal Conductivity: 0.03 to 100 W/mK
Thermal Diffusivity: 0.02 to 40 mm²/s
Specific Heat Capacity: 0.10 to 4.5 MJ/m³K
Measurement Time: 2.5 s to 2560 s
Reproducibility: 2% for thermal conductivity, 10% for thermal diffusivity, 12% for volumetric specific heat
Accuracy: Better than 5% for thermal conductivity
Sample Size: Minimum 3 mm high, 13 mm diameter; unlimited maximum size

Contact Information: Hot Disk AB, Chalmers Science Park, Gothenburg, Sweden. Phone: +46 31 772 13 85, Email: [email protected]

Catalog excerpts

Ther m al Consta nts A nalyser TPS 500 Transforming the complex into the simple

Open the catalog to page 1

TPS 500 The Hot Disk® TPS 500 Thermal Constants Analyzer quickly and accurately measures thermal conductivity, thermal diffusivity and specific heat capacity of a wide range of materials. The economical TPS 500 condenses the patented TPS technology with next-generation analysis software, resulting in the smartest, simplest-to-use thermal conductivity apparatus on the market. The TPS 500 measures the thermal transport properties of solids, pastes, liquids and powders over a temperature range of –100 °C to 200 °C. The TPS 500 encompasses similar accuracy and sample size flexibility as the benchmark...

Open the catalog to page 2

TPS 500 THERMAL CONDUCTIVITY METER SPECIFICATIONS Materials Solids, Liquids, Powders & Pastes Thermal Conductivity Thermal Diffusivity Specific Heat Capacity Measurement Time 2 % (thermal conductivity) 10 % (thermal diffusivity, sensor radius 6.4 mm) 12 % (volumetric specific heat, sensor radius 6.4 mm) Better than 5 % (thermal conductivity) Temperature Range Power Requirements Adjusted to the line voltage in the country of use Smallest Sample Dimensions 3 mm High, 13 mm Diameter or Square Largest Sample Size Sensor Types Available Kapton insulated with or without cable (from cryogenic temperatures...

Open the catalog to page 3

HEAD OFFICE c/o Chalmers Science Park Chalmers University of Technology Sven Hultins gata 9 E-mail: [email protected] YOUR LOCAL REPRESENTATIVE

Open the catalog to page 4

All Hot Disk catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list