Homide 250

1 / 1 PageView full catalog

Homide 250

Product catalog summary

Chemical Structure:

The document does not provide a visual representation of the chemical structure.

Chemical Properties:

Form: Powder
Colour: Yellow
Particle Size: 100% less than 200 µm (measured by dry sieving)
Gel Time: 150-300 seconds on a hot plate at 171°C
Softening Range: 90-125°C (measured by DSC)
Solubility: Soluble in N-methylpyrrolidone, N-ethylpyrrolidone, and dimethylformamide
Bulk Density: 380-420 kg/m³
Cure Density: 1.4-1.5 g/cm³
Particle Size D50: Maximum 50 µm (measured by Malvern)

Handling:

Refer to the safety data sheet for Homide 250 for detailed handling instructions.

Storage:

Store Homide 250 in a cool, dry place at temperatures below 35°C, avoiding humidity, in tightly closed containers. Under these conditions, the product can be stored for at least two years.

Catalog excerpts

TECHNICAL DATASHEET Homide 250 Bismaleimide Resin CAS-no. 26140-67-0 1. Chemical Structure: 2. Chemical Properties: Characteristic Form: Colour: Particle size: Gel time: Softening range: Solubility: Bulk density: Cure density: Particle size D50: Specification Powder Yellow 100 % <200 µm 150-300 sec 90-125°C in N-methylpyrrolidone, N-ethylpyrrolidone, dimethylformamide 380-420 kg/m³ 1,4-1,5 g/cm³ max. 50 µm Method of Analysis Dry sieving Hot plate at 171°C DSC Malvern 3. Handling: Please refer to safety data sheet Homide 250. 4. Storage: Homide 250 should be stored in a cool and dry place at temperatures below 35°C, excluding humidity, in tightly closed containers. Under these conditions the product can be stored for a period of at least two years. Document No.: TD 023 Revised: KA/AU, 24.11.

Open the catalog to page 1

All HOS-Technik Vertriebs- und Produktions-GmbH catalogs and technical brochures

Homide 801L
1 Page
Homide 801
1 Page
Homide 400L
1 Page
Homide 400
1 Page