• Connects two lO-Link devices and provides access via Modbus RTU interface • Rugged design; easy installation with no assembly or individual wiring required • 5-pin M12 male quick-disconnect connector • Two 4-pin M12 female quick-disconnect connectors • Built-in indication for two IO-Link master ports • Built-in indication for Modbus RTU connection status • Rugged over-molded design meets IP65, IP67, and IP68 The R45C 2-Port Converter connects to two IO-Link devices and provides access to IO-Link data and functionality via a Modbus RTU connection. Modbus registers allow for access to both IO-Link devices and their functions: • Connected device information • ISDU data • IO-Link events • Data storage Install the R45C 2-Port Converter to allow access for functional checks, maintenance, and service or replacement. All mounting hardware is supplied by the user. Fasteners must be of sufficient strength to guard against breakage. Use of permanent fasteners or locking hardware is recommended to prevent the loosening or displacement of the device. The mounting hole (4.5 mm) in the R45C 2-Port Converter accepts M4 (#8) hardware. See the figure below to help in determining the minimum screw length. Screw Length (with screw head fitting in counterbore) = 12.9 mm + X” mm + 3 mm CAUTION: Do not overtighten the R45C 2-Port Converter's mounting screw during installation. Overtightening can affect the performance of the R45C 2-Port Converter.

The R45C-2K-MQ lO-Link Master/Modbus Converter has matching RGB LED indicators on both sides for each lO-Link device port to allow for installation needs and still provide adequate indication visibility. There is also an Amber LED indicator on both sides of the converter, which is specific to Modbus communication. lO-Link Device Port 1 and Port 2 RGB LEDs

MAN1411-01 IOLINK-2 DS Specifications Voltage Input

Accessories - Cordsets 5-Pin Threaded M12 Cordsets—Double Ended Male Straight/ Female Straight Pinout (Male) Pinout (Female) 5-Pin Threaded M12 Cordsets—Double Ended Dimensions Pinout (Male) Pinout (Female) 1 = Brown

MAN1411-01 IOLINK-2 DS 4-Pin Threaded M12 Cordsets—Double Ended Male Straight/ Female Straight Male Right-Angle/ Female Straight Male Right-Angle/ Female Right-Angle Maintenance and ServiceDo not use alcoholic cleaning agents. The R45C 2-Port Converter is maintenance-free. 5 | Page

MAN1411-01_IOLINK-2_DS FCC Part 15 Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment...