X-ray Fluorescence Sulfur-in-Oil Analyzer SLFA-60/6000 Series

SLFA-60/6000 series for a new generation of petroleum products Compact & Robust Design Simple Operation Safety Features HORIBA introduces the new standard of sulfur-in-oil analyzers, the SLFA-60 and 6000 series. These instruments feature new software and hardware to meet the growing challenges in the petroleum industry. Wide Sample Range Compact & Robust Design Secondary Window to Prevent Leakage Large Screen Display Both the SLFA-60 and 6000 series have a protective membrane covering the cell window to prevent the detector and X-ray tube from accidental sample leakage. This protective membrane...

X-ray Fluorescence Sulfur-in-Oil Analyzer Simple Operation Output Options Measurement Procedure 2. Place the sample cell on the sample holder Print out, USB memory stick and USB cables connected to PC are available as output options. * Printer can be switched off if not used. i) Wide Data Printouts 1. Pour the sample into the sample cell 4. Press the “MEAS” button to start the measurement 5. Instrument displays the results and data output Calibration New software allows the SLFA-60 to store 3 sets of calibration and the SLFA-6000 series 5 sets. It also allows the users to choose between linear...

X-ray Fluorescence Analysis Method Measurement samples Sulfur in petroleum products such as heavy oil, naphtha, crude oil and light oil Measurement range 15 ppm or less with a 1% sulfur sample 5 ppm or less with a 1% sulfur sample, 1.6 ppm or less with a 0% sulfur sample +/- 50 ppm or less per C/H 1with a 1% sulfur sample Lower detection limit Number of calibration curves Calibration curve order Linear or Quadratic (both automatic selection and manual settings are available) Amount and number of samples Measurement time Data output Printout, USB memory stick, USB cable connected to PC Spectrum...