*mydirectindustry

VA-5000 Analyzer

Product catalog summary

Overview: The document provides detailed specifications and configurations for the VA-5000 and VS-5000 series analyzers and sampling units. These devices are used for gas analysis using various measurement principles such as NDIR, CLA, Magnetopneumatic, Galvanic cell, and Zirconia.

Specifications:

Measurement Principles: Includes NDIR, CLA, Magnetopneumatic, Galvanic cell, Zirconia, and Paramagnetic.
Performance: Linearity is ±1.0% F.S. with response times varying from 30 to 45 seconds depending on the component. Warm-up times range from 20 to 120 minutes.
Flow Rate: Standard flow rates are 0.5L/min and 1.0L/min for specific configurations.
Communication: Ethernet (ModbusTM/TCP) and USB memory for data storage.
Input/Output: Analog and digital options with various channel configurations and load resistances.
Sample Conditions: Ambient temperature, dust-free, with specific pressure and humidity requirements.
Installation: Includes gas connections, tubing, and joint specifications.
Power and Display: Operates on 100-240 V AC with a 5.7-inch touch screen display.

Dimensional Outlines: Provides dimensions for both the analyzer and sampling units, with detailed measurements for installation and configuration.

VS-5000 Sampling Unit:

Applicable Principles: Supports NDIR, Zirconia, Galvanic cell, MPA, PMA, and CLA.
Sampling Method: Dry sampling with materials like SUS, PP, PVC, PVDF, PTFE, FKM, CR, and Glass.
Flow Rate: Ranges from 1.5 to 5.0 L/min with specific configurations for different systems.
Power Consumption: Varies between 150 VA and 200 VA depending on the model.

Installation and Environmental Conditions:

Temperature and Humidity: Operates between 0-45°C with a maximum humidity of 90% (non-condensing).
Altitude: Maximum operational altitude is 3000m for NDIR and 2000m for other combinations.
Gas Connections: Detailed specifications for sample inlets, outlets, and calibration gas inlets.

Additional Components: Includes a legend for various components such as analyzers, filters, pumps, and valves used in the system configuration.

Catalog excerpts

Measurement principle *1 Flow rate: 0.5L/min, Faster response time (T90) such as 7sec is achievable as special option *2 Available when all components are NDIR and PMA VS-5000 Sampling Unit Model *1 Environmental temperature needs to be less than 35°C. If it's over 35°C, please consult HORIBA. *2 When the sample gas includes more than 6ppm NO2, it needs to use optional NOx converter. Dimensional Outlines Rubber feet, deozonator unit and mounting brackets (e.g. slide rails, and rack mounting plates) are optional. Unit: mm(in)

Open the catalog to page 1

All HORIBA Process & Environmental catalogs and technical brochures

Archived catalogs

B-700series
5 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list