INM-700
4Pages

Catalog excerpts

Process & Environmental For improved process monitoring, rapid control capability, and lower life cycle costs, you need an analyzer that delivers: Feature o High spatial resolution Feature Q Fast response time Feature Q Easy installation and operation

Open the catalog to page 1

proven technology and easy operation delivers improved Versatile, compact in-situ design is the best option for process monitoring and control The HORIBA In-situ NOx/02 analyzer's rugged, compact design allows placement indoors or outdoors. The probe may be mounted directly in the stack or close to combustion sources through a single port. The INM-700 offers easy installation and operation for accurate measurement of NOx/02 for real time monitoring and control. Using a unique Zirconium Oxide sensor and a non-extractive probe, the INM-700 offers fast response times of less than 10 seconds...

Open the catalog to page 2

monitoring and process control. OHigh spatial resolution Compact and efficient by design the analyzer consists of a controller unit and a probe unit. The probe facilitates precise placement at critical flow areas to provide high spatial resolution, rapid response times, •No requirements for installation of sampling hardware •Small profile for tight applications •Readily retrofitted onto existing facilities Easy to use control unit □ Easy to read, high brightness display with intuitive menu commands □ Industry standard CSV file format ( Controller unit ) Simple system configuration Probe...

Open the catalog to page 3

5K-1 Compared to the actual value, the measured value changes according to the moisture content in the target gas because of wet-basis measurements (effect on the indicated value by the partial pressure of water). S8S2 First week of operation at ± 2.0% of full scale per day. S8S3 No Oil mist and dust. When instruments air cannot be arranged that satisfies these conditions, handle by arranging a small compressor or similar equipment. I Dimensional Outline Unit: mm (in) [Controller unit] [Probe unit] Colibration gas / Purge air inlet I Instead of cylinder air, instrument air that is free of...

Open the catalog to page 4